Steps Necessary To Pass The 300-610 Exam from Training Expert Prep4away
Valid Way To Pass CCNP Data Center's 300-610 Exam
NEW QUESTION # 39
An engineer must provide Layer 2 adjacency between data centers that are in two locations and separated by a routed network The adjacency must be based on Cisco Nexus 7000 Series Switches The solution must offload learning of host reachability information to the control plane to avoid excessive flood and learn congestion Also the data center in one of the sites experiences a large volume of unknown unicast traffic that the solution must mitigate Which data center interconnect technology meets these requirements?
- A. LISP
- B. OTV
- C. VPLS
- D. VXLAN
Answer: D
NEW QUESTION # 40
What is an advantage of Cisco HyperFlex Edge as compared to Cisco HyperFlex Standard Clusters?
- A. Cisco Intersight automatically creates an invisible cloud witness.
- B. Cisco UCS Manager provides service profile portability across nodes.
- C. Cisco HyperFlex Edge provides native container support through the KVM hypervisor.
- D. Cisco UCS 5108 Blade Server chassis provides SEEPROM connectivity to solve split-brain scenarios.
Answer: A
Explanation:
https://www.cisco.com/c/dam/en/us/products/collateral/hyperconverged-infrastructure/hyperflex- hx-series/whitepaper-c11-741999.pdf
NEW QUESTION # 41
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION # 42
Refer to the exhibit.
A Cisco engineer is configuring a next-generation Cisco HyperFlex HX data platform with 2 x Cisco UCS
6248UP fabric interconnects. 8 x Cisco HX-Series HX240c-M4SX servers, plus 8 x Cisco UCS B200-M4 blade servers Cisco UCS 5108 blade chassis, and Cisco UCS 2204XP fabric extenders The solution is configured with HX Release 4 5(2a) using VMware ESXi 7 0 U2 After the engineer migrates all customer VMs to the new solution platform, the engineer decides to create HX Native snapshots for all the VMs The engineer performs the operation and notices that some of the VMs are not creating snapshots. What is the most probable reason that the HX Native snapshots are not created?
- A. The source disk is thick provisioned
- B. The servers have duplicate names
- C. The node has insufficient datastore space
- D. Virtual machines are in suspended state
Answer: A
NEW QUESTION # 43
A network architect is designing a storage network to connect to an existing IP network over 100G Ethernet ports for multiple hosts The architect decided to require iSCSI multipathmg to provide multiple routes between servers within the SAN and storage devices that reside within the IP network. Which requirement must be applied to the IP network switch that connects to the SAN environment where the hosts reside9
- A. trunk configuration toward the iSCSI SAN device for multiple VLANs
- B. VLAN load balancing to the storage devices
- C. ECMP routes on the IP network to facilitate toad sharing
- D. multiple physical connections to the iSCSI SAN device
Answer: C
NEW QUESTION # 44
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Answer:
Explanation:
NEW QUESTION # 45
A storage engineer requires a solution that achieves multiple paths between a server and storage array. The design must support complete traffic isolation and support a 50% growth in the next year. Which FCoE solution meets these requirements?
- A. at least two FC zone sets with multiple zones
- B. single VSAN across the fabric
- C. at least two VSANs across the fabric
- D. single switch with multiple links
Answer: C
NEW QUESTION # 46
A network consultant must design a high availability interconnection of a clustered Cisco UCS Fabric Interconnect toward two upstream Layer 2 switches.
The Ethernet interconnection must use all redundant links and have no impact on the STP domain size.
Which connectivity solution must be used?
- A. Cisco UCS Fabric Interconnect in end host mode with dual uplinks distributed evenly to the upstream switches
- B. Cisco UCS Fabric Interconnect in end host mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size
- C. Cisco UCS Fabric Interconnect in switch mode with dual uplinks distributed evenly to the upstream switches
- D. Cisco UCS Fabric Interconnect in switch mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size
Answer: A
NEW QUESTION # 47
Refer to the exhibit.
An engineer working for a service provider with an employee ID: 4800:35-849 must perform the mapping of Fibre Channel LUN targets lo the indicated iSCSI virtual target. Which configuration shows the requited mapping?
- A.
- B.
Answer: B
NEW QUESTION # 48
A network architect proposes a distinct Fibre Channel fabric to be used for a Cisco UCS blade server that hosts critical applications.
Which action should be implemented for the Fibre Channel traffic from the vHBA of this server to pass through the I/O Module in the Cisco UCS chassis to a specified uplink Fibre Channel port?
- A. Include a SAN pin group in the vHBA policy.
- B. Update the applied Fibre Channel adapter policy.
- C. Update the applied global QoS policy.
- D. Enable Persistent Binding in the vHBA policy.
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User- Guides/Storage-Mgmt/3-
2/b_UCSM_GUI_Storage_Management_Guide_3_2/b_UCSM_GUI_Storage_Management_Guid e_3_ 2_chapter_0110.pdf
NEW QUESTION # 49
An ACI deployment must:
- Only use a proxy for border leaf switches.
- Classify incoming traffic on L3OUT.
- Immediately update the endpoint database when the endpoint moves
between leaf switches.
Which VRF configuration must be used?
- A. Ingress Policy Control enforcement
Egress Policy Control enforcement
IP Dataplane Learning enabled - B. Enforce Subnet Check disabled
IP Dataplane Learning disabled
Ingress Policy Control enforcement - C. Enforce Subnet Check enabled
IP Dataplane Learning enabled
Egress Policy Control enforcement - D. Ingress Policy Control enforcement
Enforce Subnet Check enabled
IP Dataplane Learning disabled
Answer: A
NEW QUESTION # 50
An ACI deployment must:
Which VRF configuration must be used?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
NEW QUESTION # 51
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
NEW QUESTION # 52
Refer to the exhibit.
An engineer must connect the four-port Cisco UCS VIC adapter to the fabric extenders.
Which connectivity implements a port-channel standalone mode?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 53
Refer to the exhibit. A Cisco engineer is configuring a data center design scenario with Cisco MDS 90Q0 Series Switches. The cut-through routing mode is chosen for impf oved read operation performance. Each (SCSI host requires access lo storage through the IPS module. First, the engineer configures the TCP tuning parameters as enabled SACK, the maximum bandwidth of 1 Gbps. buffer size of 4096. keepalive timeout at
1s. and enables Path MTU. Then, the engineer must set the OoS of the ISCSI link. What is the maximum QoS value that must be set tor the ISCSI session?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 54
An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?
- A. proxy ARP
- B. flow control
- C. HSRP
- D. IP redirects
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/lisp/configuration/guide/ b_NX-OS_LISP_Configuration_Guide/b_NX-OS_LISP_Configuration_Guide_chapter_010.html
NEW QUESTION # 55
A customer with a single data center wants to provide resiliency in the form of an additional hosting location. The customer's engineering team requested asynchronous replication for the primary systems. The team prefers a minimal latency between locations for data replication and they can tolerate a 4-hour MTTR period. Which architecture offers maximum business continuity in the event of a primary data center failure?
- A. new secondary data center with Layer 2 spanned between data centers 1000 km away with RTT
10 ms - B. A new DR site 50 km away with RTT 5 ms
- C. new secondary data center with Layer 3 VXLAN spanned between data centers 2 km away with RTT 2 ms
- D. new secondary data center with Layer 2 spanned between data centers 2 km away with RTT 2 ms
Answer: B
NEW QUESTION # 56
A Cisco UCS instance has four interfaces on a UCS VIC. Where on the fabric interconnect does each interface terminate?
- A. virtual interface
- B. vPC
- C. physical port
- D. port channel
Answer: A
NEW QUESTION # 57
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Answer:
Explanation:
NEW QUESTION # 58
A company has added a new FCoE storage array to increase the performance of datastore access for end users. This storage array is directly connected to the Cisco Nexus 5672UP switches using four 10G port-channel interfaces. After deployment, the end users fail to access the datastore compared to the older solution. A network engineer verified the port-channel interface and finds that the congestion occurs when PFC frames are generated at the FCoE ingress interface. Which action must be taken to resolve the congestion issue?
- A. Add an additional FCoE VLAN to the SAN network.
- B. Increase the queuing buffer in the port-channel interface connected to the storage array.
- C. Reserve bandwidth for FCoE VLAN on the port-channel interface connected with storage.
- D. Enable the FCoE class in QoS on Cisco Nexus 5672UP switches.
Answer: D
Explanation:
- The Cisco Nexus 5672UP switches require explicit QoS configuration for handling FCoE traffic properly.
- Enabling the FCoE class within QoS policies ensures that FCoE traffic is treated as a no-drop class and prioritized appropriately.
- Proper QoS classification allows the switch to handle flow control frames like PFC without causing congestion and frame drops.
- Reserving bandwidth or adding VLANs alone does not necessarily address the traffic classification and buffering required for lossless Ethernet needed by FCoE.
- Increasing queuing buffer alone is not sufficient without the QoS policy enabling proper prioritization and lossless behavior.
Supporting references indicate that enabling the FCoE class in the three types of QoS policies (classification, queuing, and scheduling) must be done before enabling FCoE on Cisco Nexus switches like the 5672UP to properly manage congestion and PFC behavior.
NEW QUESTION # 59
......
How long should I study for the Cisco 300-610 Exam?
It is important to study for the Cisco 300-610 Exam. It is a good idea to study for a while and then take a break. The Cisco 300-610 Exam is very important, so make sure you have plenty of time to prepare. It is a good idea to get together with friends and family and work on the Cisco 300-610 Exam together. You can help each other understand the concepts behind the questions, which can make it easier to learn from your mistakes. The more you practice answering questions, the better you will be at remembering the information when you need it for the real Cisco 300-610 Exam. Proctored identifies the expiry trigger. It is also a good idea to ask someone who has recently taken the Cisco 300-610 Exam what they thought of it and how they prepared for it. This can give you some great tips on how to prepare for your own Cisco 300-610 Exam. Updated PDF is including to level the pay updates. There are many different ways that you can study for the actual Cisco 300-610 Dumps. You can use books, websites, or mobile apps to help with your studying. You just have to find what works best for your studying style. I recommend reading through as many practice questions as possible in order to get used to answering them quickly and efficiently also download.
What is Cisco 300-610 Exam certification?
Cisco 300-610 Exam certification is an IT certification that is advanced in the field of computer networking. It is a professional exam that is designed to test the skills and expertise of IT professionals. The Cisco 300-610 Exam certification exam is designed to test the competency of the IT professionals to plan, design, maintain and monitor the Cisco Data Center Infrastructure. This exam validates that you have all the skills and knowledge required to install, configure, troubleshoot and monitor a Cisco Data Center Infrastructure which includes Cisco Nexus Switches and Cisco Unified Computing System (UCS). Credit voucher greatly varies suggests. As compared to other similar IT certifications like Checkpoint Certified Security Expert R77.10, this Cisco 300-610 Exam certification exam is considered more difficult as it covers a wide range of topics related to networking infrastructure. 300-610 Dumps is an online, self-paced training package that helps you prepare for the exam.
Cisco 300-610 exam is an essential certification exam for professionals who want to validate their skills in designing Cisco data center infrastructure. 300-610 exam covers a range of topics related to data center infrastructure design, including networking, storage, compute, automation, and security. Passing 300-610 exam is a crucial step for professionals who want to advance their career in the field of data center infrastructure design and management.
All 300-610 Dumps and Designing Cisco Data Center Infrastructure Training Courses: https://www.prep4away.com/Cisco-certification/braindumps.300-610.ete.file.html
Free Test Engine For Designing Cisco Data Center Infrastructure Certification Exams: https://drive.google.com/open?id=1oKeXpc5YsWI_uYAFa3u8GqXnHbnt_tbH