Jan-2022 IBM C1000-026 Actual Questions and Braindumps
C1000-026 Dumps To Pass IBM Exam in 24 Hours - Prep4away
IBM C1000-026 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
Understanding technical and functional aspects of OpenShift Container Platform Architecture
The following will be discussed in IBM C1000-026 dumps:
- Describe the config documents utilized for networkDNS
- Describe how the Load Balancer have is utilized in a various expert (HA) geography
- Describe the means of case creation
- Explain how an assistance is utilized for outer and inner correspondence
- Describe the parts of a case
- Describe the hosts required foran OpenShift Container Platform to help an insignificant ICP4D base climate
- Explain the elements of a course
- Explain the reason for the replication regulator
- Describe the motivation behind the Load Balancer
- Explain why numerous expert hosts may be required
- Describe the different stockpiling arrangements accessible for OpenShift
- Describe whenit would be important to add more laborer hubs to the group
- Explain which parts give information to outside the group from a unit
- Explain the substance of the Ansible stock document
- List different administrations that a holder can give
- Explain the effect of driving a picture into the OpenShift Container Registry
- Explain how units are utilized to build execution
- Discuss the motivation behind the etcd have
- Explain how compartments are utilized inside cases
- Explain the security model of an OpenShift Project containing different namespaces
For more info read reference:
NEW QUESTION 15
What happens if QRadar receives events at a higher rate than the license allows?
- A. The events will be dropped immediately
- B. The events will not be parsed
- C. The source system will be asked to resend the events later
- D. The events will be put into queues
Answer: D
Explanation:
Explanation/Reference: https://www.ibm.com/support/pages/qradar-event-and-flow-burst-handling-buffer
NEW QUESTION 16
An administrator needs to save a search to use it in the dashboards.
To do so, which search feature does the administrator need to select in the "Include in my Dashboard" checkbox?
- A. Group by some property
- B. Filter events of the last 5 minutes
- C. Filter events of the last 7 days
- D. Filter events of the last month
Answer: A
Explanation:
Explanation/Reference: https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.3/com.ibm.qradar.doc/ b_qradar_users_guide.pdf (42)
NEW QUESTION 17
Due to regulatory constraints, an administrator must increase the minimum password length and complexity.
In which QRadar section can the administrator change this setting?
- A. Admin / Security profiles
- B. Admin / Password policy
- C. Admin / System settings
- D. Admin / Authentication
Answer: B
Explanation:
Reference:
alps_configuring_admin_settings.htm
NEW QUESTION 18
When an administrator attempts to edit a log source after upgrading QRadar, a Device Support Module (DSM), a protocol, or Vulnerability Information Services (VIS) components, the following error message appears.
An error has occurred. Refresh your browser (press F5) and attempt the action again. If the problem persists, please contact customer support for assistance.
What action should the administrator take to troubleshoot this issue? (Choose two.)
- A. systemctl start tomcat
- B. Clear browser cache
- C. systemctl restart httpd
- D. systemctl restart iptables
- E. systemctl restart ecs-ep
- F. systemctl restart snmpd
Answer: A,B
Explanation:
Reference:
t_QRadar_Troubleshooting_guide_PurgeFiles.html
NEW QUESTION 19
An administrator needs to restore from backup the applications in QRadar.
Which configuration item should the administrator select?
- A. Backup Installed Applications
- B. Installed Applications Backup Configuration
- C. Installed Applications Configuration
- D. Installed Programs Configuration
Answer: C
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/SS42VS_7.3.2/com.ibm.qradar.doc/ t_adm_appnode_appbackup.html
NEW QUESTION 20
Which IBM monitoring application can be used to see detailed health and status information at the application, middleware, and system level?
- A. QRadar Advisor With Watson App
- B. QRadar Operations App
- C. QRadar Deployment Intelligence App
- D. QRadar Assistant App
Answer: C
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/en/SSKMKU/com.ibm.QDIapp.doc/ c_qapps_QDI_intro.html
NEW QUESTION 21
An administrator needs to know if a custom rule is being correlated correctly.
Which QRadar component is responsible for this process?
- A. QRadar Event Collector
- B. QRadar Console
- C. QRadar Event Processor
- D. Magistrate
Answer: C
Explanation:
Reference:
https://www.ibm.com/support/pages/qradar-global-correlation
NEW QUESTION 22
An administrator needs to add the following networks to a QRadar network hierarchy as a single Classless Inter-Domain Routin (CIDR) range:
192.168.64.0/24
192.168.65.0/24
192.168.66.0/24
192.168.67.0/24
What is the correct supernet for these subnets?
- A. Network 192.168.66.0 with subnet mask 255.255.252.0
- B. Network 192.168.66.0 with subnet mask 255.255.252.0
- C. Network 192.168.64.0 with subnet mask 255.255.252.0
- D. Network 192.168.64.0 with subnet mask 255.255.255.0
Answer: D
NEW QUESTION 23
What is the minimum memory in gigabyte (GB) required for a QRadar All-in-One Virtual 3199 appliance?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.1/com.ibm.qradar.doc/ c_qradar_ha_vrt_ap_reqs.html
NEW QUESTION 24
An administrator has been tasked to run all health checks at once using the DrQ command before a major event happens, such as an upgrade.
What does the DrQ command do?
- A. It shows all the available drives on the QRadar managed host.
- B. It runs all available checks in /opt/ibm/si/diagnostiq and writes the results in a txt file.
- C. It runs all available checks in /opt/ibm/si/diagnostiq with the checkup mode and with the summary output mode.
- D. It checks all the available drives on the QRadar managed host and writes the results on a txt file.
Answer: C
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.2/com.ibm.qradar.doc/ t_drq_running_health_checks.html
NEW QUESTION 25
An administrator needs to know if a custom rule is being correlated correctly.
Which QRadar component is responsible for this process?
- A. QRadar Event Collector
- B. QRadar Console
- C. QRadar Event Processor
- D. Magistrate
Answer: C
Explanation:
Explanation/Reference: https://www.ibm.com/support/pages/qradar-global-correlation
NEW QUESTION 26
An administrator needs to save a search to use it in the dashboards.
To do so, which search feature does the administrator need to select in the "Include in my Dashboard" checkbox?
- A. Group by some property
- B. Filter events of the last 5 minutes
- C. Filter events of the last 7 days
- D. Filter events of the last month
Answer: A
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.3/com.ibm.qradar.doc/ b_qradar_users_guide.pdf (42)
NEW QUESTION 27
An administrator needs to combine multiple extraction and calculation-based properties into a single property.
Which Ariel Query Language (AQL) statement can be used?
- A. AQL functions
- B. AQL functions and SELECT, FROM, or database names
- C. AQL-based custom properties
- D. AQL functions and AQL-based custom properties
Answer: C
Explanation:
Reference:
c_aql_whatsnew_731.html
NEW QUESTION 28
An administrator may be asked to collect diagnostic information on one of our main services. For example, ecs-ec.
Commands such as:
/opt/qradar/support/thredtop.sh
/opt/qradar/support/jmx.sh
These commands collect thread and statistical information on the Services pipeline, queues and filters.
How would an administrator identify a list of jmx ports for each service?
- A. grep JMXPORT /opt/qradar/system/mem/*
- B. grep JMXPORT /opt/qradar/systemd/env/*
- C. grep JMXPORT /opt/qradar/init/*
- D. grep JMXPORT /opt/qradar/system/bin/*
Answer: B
NEW QUESTION 29
Which of the following dashboards is a QRadar default Dashboard?
- A. Threat and Security Monitoring
- B. Monitoring Overview
- C. Compliance and Reporting Monitoring
- D. Vulnerability Overview
Answer: A
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.2/com.ibm.qradar.doc/ c_qrm_default_dboard.html
NEW QUESTION 30
An administrator needs to save the nightly QRadar backups on a network storage.
The administrator has established the connection to the network storage.
What should the administrator do next?
- A. Change the Backup Repository Path to the network storage location using the System Settings window.
- B. Change the Backup Repository Path to the network storage location using the Backup Recovery Configuration window.
- C. Change the Backup Repository Path by adding a new Network Activity Rule.
- D. Configure the new network storage using the Assets Manager
Answer: B
Explanation:
Explanation/Reference: http://ftpmirror.your.org/pub/misc/ftp.software.ibm.com/software/security/products/qradar/ documents/7.2.8/en/b_qradar_admin_guide.pdf (146)
NEW QUESTION 31
A QRadar upgrade is planned and a maintenance window is scheduled. The administrator must stage the FIXPACK from IBM Fix Central.
Which QRadar FIXPACK file type must the administrator download?
- A. IMG
- B. SFS
- C. XFS
- D. RPM
Answer: B
Explanation:
Explanation/Reference: https://www-945.ibm.com/support/fixcentral/swg/selectFixes?parent=IBM%
20Security&product=ibm/Other+software/IBM+QRadar+Network
+Insights&release=7.3.0&platform=Linux&function=all
NEW QUESTION 32
An administrator needs to combine multiple extraction and calculation-based properties into a single property.
Which Ariel Query Language (AQL) statement can be used?
- A. AQL functions
- B. AQL functions and SELECT, FROM, or database names
- C. AQL-based custom properties
- D. AQL functions and AQL-based custom properties
Answer: C
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.2/com.ibm.qradar.doc/ c_aql_whatsnew_731.html
NEW QUESTION 33
......
Download the Latest C1000-026 Dump - 2022 C1000-026 Exam Question Bank: https://www.prep4away.com/IBM-certification/braindumps.C1000-026.ete.file.html