[Nov 11, 2023] Valid DES-3128 Test Answers Full-length Practice Certification Exams
Accurate & Verified 2023 New DES-3128 Answers As Experienced in the Actual Test!
NEW QUESTION # 16
What is the minimum number of served licenses required for a customer with 5 datazones and 2 additional storage nodes per datazone?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
The minimum number of served licenses required for a customer with 5 datazones and 2 additional storage nodes per datazone is 7. This is because each datazone requires a minimum of 1 served license, and each additional storage node requires an additional served license. The other options are not related to this process.
NEW QUESTION # 17
A NetWorker server has a media library attached. A customer needs to back up their VMware environment using vProxy A designated pool was created for the VMware backups However, this pool is not listed in the drop-down menu during a backup action creation.
What is the cause of this behavior?
- A. vProxy backups can only be directed to CloudBoost devices.
- B. A vProxy is disabled
- C. vProxy backups can only be directed to Data Domain devices.
- D. The media library is disabled.
Answer: A
NEW QUESTION # 18
A backup administrator is performing a Block-Based Backup of a RHEL Server and it fails What is the cause of the issue?
- A. AFTD device is enabled for Client Direct.
- B. LVM or VxVM are enabled on the OS level.
- C. The Igtobbb package is not installed.
- D. PSS is enabled for target Data Domain devices.
Answer: C
Explanation:
Block-Based Backup requires that the Igtobbb package is installed on the RHEL server. If this package is not installed, then the Block-Based Backup will fail. The other options are not related to the cause of the issue.
NEW QUESTION # 19
A NetWorker server is backing up a Windows client lo LTO Ultrium-7 media. Users complained about a heavy load on this Windows server, and the backup was forcibly stopped. A customer asks to restore the data which was backed up before the backup stopped.
What should the administrator tell the customer?
- A. Recovery from aborted save sets is not supported.
- B. Run a recover command.
- C. Run a scanner command.
- D. Open a service request with Dell Technologies Support
Answer: B
NEW QUESTION # 20
Which deduplication solution is supported within a NetWorker environment?
- A. Avamar
- B. PowerStore
- C. PowerScale
- D. PowerProtect
Answer: D
Explanation:
PowerProtect is a deduplication solution from Dell EMC which is supported within a NetWorker environment. PowerProtect provides fast and efficient deduplication of data to reduce storage costs and improve backup performance. It is designed to be easy to use, with an intuitive user interface and support for multiple operating systems and applications.
NEW QUESTION # 21
A NetWorker server has a PowerProtect DDVE attached It is running out of space, and a customer needs to offload some data to AWS S3 What is the recommended way to perform this?
- A. Deploy a NetWorker storage node in AWS.
- B. Manually copy data to AWS S3
- C. Utilize a Dell EMC Cloud Tier feature.
- D. Deploy a NetWorker storage node in AWS.
Answer: C
Explanation:
The Dell EMC Cloud Tier feature allows customers to offload data from a PowerProtect DDVE to a cloud storage provider such as AWS S3. This feature provides a cost-effective way to store data in the cloud and helps to reduce storage costs associated with on-premises storage.
NEW QUESTION # 22
A backup administrator has installed a NetWorker Server on a Windows 2019 host. The installation finished successfully. When the NMC Launcher started and the backup server's name is specified as the NMC server, the following error is observed.
Unable to connect the NMC server
The administrator determined the NMC was not installed. What is the recommended action to resolve the issue?
- A. Open a service request with Dell Technologies.
- B. Rerun the installation and enable the NMC option.
- C. Run the lgtonmc-[version].exe installation executables.
- D. Run the lgtoxtdcint-fversionJ.exe installation executable.
Answer: A
NEW QUESTION # 23
When deploying a new CloudBoost appliance, which command must be run to enable remote client mounts?
- A. diagnostics
- B. nsrsnmd
- C. remote-mount-password
- D. passwd
Answer: C
Explanation:
When deploying a new CloudBoost appliance, the remote-mount-password command must be run to enable remote client mounts.
NEW QUESTION # 24
What is a part of a full backup in a Windows BMR recovery operation?
- A. UEFI Partitions
- B. Critical volumes
- C. Windows File System
- D. Windows Roles
Answer: C
NEW QUESTION # 25
A backup administrator has configured the backup of the All save set on a Linux host that contains a remote mount point. During the restore, the administrator did not see the mount point data but only local data What is the reason for this behavior?
- A. NetWorker does not support Linux mount point backup.
- B. Mount point backups require the extended client
- C. The save command did not include the -X option.
- D. The save command did not include the -x option.
Answer: D
NEW QUESTION # 26
What is staging used for?
- A. maintain a longer retention period
- B. move data to a different storage device
- C. make and keep a second copy at all times
- D. keep both copies online at all times
Answer: B
NEW QUESTION # 27
An administrator already added a client "CLientA" This client has recently been assigned a second DNS named "ClientAB" When the backup ran, the following error is observed
"The client ClientAB is not in backup servers' clients list."
Use the simulator to resolve this issue
When you have finished, continue to the next question
Answer:
Explanation:
Send the feedback for this answer.
NEW QUESTION # 28
An administrator is performing a directed recover to a Microsoft Windows cluster environment.
What is the role of the client that initiated the recovery?
- A. Administering client
- B. NMC client
- C. Source client
- D. Destination client
Answer: C
Explanation:
The client that initiated the directed recover is known as the source client. This client is responsible for sending the data to the destination client. The destination client is the one that will receive the data from the source client, and the administering client is the one that initiates the recover process. The NMC client is used for monitoring the recover process.
NEW QUESTION # 29
An administrator wants to create a client "ABO" to back up alt critical volumes for disaster recovery. They want the backup utility to scan a volume or a disk m a file system and back up all the blocks that are in use in the file system Also, the user has a feature that allows for a single high-density file system to be spirt into multiple concurrent save sets to speed up the backup walk process. The client must send 6 save sets simultaneously in a backup.
Use the simulator to perform the task
When you have finished, continue to the next question.
Answer:
Explanation:
Send the feedback for this answer.
NEW QUESTION # 30
An administrator wants to use block-based backups on a Windows client. They have already installed the NetWorker client software package on the system Which statement describes the need for an additional NetWorker package to enable Block-based Backup support?
- A. Logical Volume Manager is required.
- B. NetWorker Extended Client software is required.
- C. NetWorker Block-based Backup software is required.
- D. No additional software is required.
Answer: C
NEW QUESTION # 31
Which NetWorker component is comprised of a single NetWorker Server, its clients, and storage nodes?
- A. datazone
- B. save set
- C. media pool
- D. protection group
Answer: B
NEW QUESTION # 32
Which commands can be used to locate the bootstrap SSID on a backup volume?
- A. nstinfo and mminfo
- B. scanner and mminfo
- C. nsrnm and scanner
- D. mminfo and nsrck
Answer: B
NEW QUESTION # 33
A NetWorker server is backing up a Windows client lo LTO Ultrium-7 medi a. Users complained about a heavy load on this Windows server, and the backup was forcibly stopped. A customer asks to restore the data which was backed up before the backup stopped.
What should the administrator tell the customer?
- A. Run a recover command.
- B. Recovery from aborted save sets is not supported.
- C. Run a scanner command.
- D. Open a service request with Dell Technologies Support
Answer: B
Explanation:
NetWorker does not support recovery from aborted save sets, so the administrator should inform the customer that the data backed up before the backup was stopped cannot be recovered.
NEW QUESTION # 34
What is a feature of the CloudBoost appliance?
- A. enables the transfer of backups to Dell EMC Cloud Tier
- B. replaces the PowerProtect DDVE appliance
- C. enables the transfer of backups to cloud storage
- D. replaces the PowerProtect DD series appliance
Answer: C
Explanation:
One of the features of the CloudBoost appliance is that it enables the transfer of backups to cloud storage. It does not replace the PowerProtect DD series or DDVE appliance.
NEW QUESTION # 35
What is true of a BMR when using NetWorker?
- A. required when a host encounters a catastrophic failure
- B. restores Linux operating system
- C. can be used for recovery of NetWorker server database
- D. restores VM operating system
Answer: C
Explanation:
A Bare Metal Restore (BMR) using NetWorker is a process that can be used to completely restore the NetWorker server database onto a new server. This process can be used in the event of a catastrophic failure, or when the existing server must be replaced.
NEW QUESTION # 36
A customer recently added a Hyper-V 2016 servers' farm, and the hosted Virtual Machines need to be backed up. The administrator has already installed a NetWorker client on all Hyper-V hosts.
Which additional component must be installed on the Hyper-V hosts to accomplish this task?
- A. NMDA
- B. Storage Node
- C. NMM
- D. vProxy
Answer: D
NEW QUESTION # 37
What is the outcome of using the recover -iN command?
- A. The file overwrites the existing file if it is newer than the existing file.
- B. The recovered file is renamed when a conflict occurs.
- C. A recover is simulated, and no data is recovered.
- D. The file is not recovered if a conflict occurs.
Answer: C
Explanation:
The recover -iN command is used to simulate a recover operation. This command will show which files would be recovered if the recover command is run, but no data is actually recovered. The other options are not related to this command.
NEW QUESTION # 38
......
Certification Topics of DES-3128 Exam PDF Recently Updated Questions: https://www.prep4away.com/EMC-certification/braindumps.DES-3128.ete.file.html
DES-3128 Certification Sample Questions certification Exam: https://drive.google.com/open?id=1miJ_p39xYYGduyOJtmjmgkZXNDbzd4sf