NSE7_PBC-6.4 Exam Dumps - PDF Questions and Testing Engine
NSE7_PBC-6.4 Dumps - The Sure Way To Pass Exam
What is Fortinet NSE7_PBC-6.4 Certification Exam
The Fortinet Certified Cybersecurity Expert (NSE7/CCE) is part of the Certified Cybersecurity Expert (CCE) Professional program and helps you to pass the Fortinet Certified Professional (FCPE) exam which is offered by the National Security Agency (NSA). The NSE7_PBC-6.4 certification is designed to validate your skills in IT security fundamentals and network security essentials. It tests your knowledge of the latest technologies in IT security including firewalls, IDS/IPS, VPNs, SSLs, malware protection techniques and more. The NSE7_PBC-6.4 certification also tests your knowledge of network security infrastructure including IPv4 and IPv6, DNS, certificates, encryption technologies, compliance and regulations such as PCI DSS, SOX and more. You will receive a lot of benefits after passing this certification exam such as improved job prospects, valuable hands-on experience with today's most popular network and cybersecurity tools such as firewalls, IDS/IPS, VPNs, SSLs, malware protection techniques and more. It is a certification exam for IT professionals and security auditors. It is a part of Certified Cybersecurity Expert (CCE) Professional program and NSE7 Foundations certification. This program is designed to help people who want to be successful at their work to become the leaders of the future. The Fortinet NSE7_PBC-6.4 certification is designed to test your knowledge of network security and cyber threat management. It tests your knowledge of the latest technologies in IT security Fortinet NSE7_PBC-6.4 Dumps cover all questions of Fortinet NSE7_PBC-6.4. It is a three hour long exam and consists of 75 percent objective and 25 percent free time for the preparation. The NSE7_PBC-6.4 certification exam has been designed by Fortinet experts, which helps you in getting high ranks in this exam.
NEW QUESTION 17
When an organization deploys a FortiGate-VM in a high availability (HA) (active/active) architecture in Microsoft Azure, they need to determine the default timeout values of the load balancer probes.
In the event of failure, how long will Azure take to mark a FortiGate-VM as unhealthy, considering the default timeout values?
- A. 20 seconds
- B. 16 seconds
- C. 30 seconds
- D. Less than 10 seconds
Answer: C
NEW QUESTION 18
Which two Amazon Web Services (AWS) topologies support east-west traffic inspection within the AWS cloud by the FortiGate VM? (Choose two.)
- A. A single VPC deployment with multiple subnets
- B. A single VPC deployment with multiple subnets and a NAT gateway
- C. A multiple VPC deployment utilizing a transit VPC topology
- D. A multiple VPC deployment utilizing a transit gateway
Answer: A,C
Explanation:
Explanation/Reference: https://www.fortinet.com/content/dam/fortinet/assets/white-papers/wp-aws-reference- architecture.pdf
NEW QUESTION 19 
Refer to the exhibit. Your senior administrator successfully configured a FortiGate fabric connector with the Azure resource manager, and created a dynamic address object on the FortiGate VM to connect with a windows server in Microsoft Azure. However, there is now an error on the dynamic address object, and you must resolve the issue.
How do you resolve this issue?
- A. Run diagnose debug application azd -lon FortiGate.
- B. In the Microsoft Azure portal, set the correct tag values for the windows server.
- C. In the Microsoft Azure portal, access the windows server, obtain the private IP address, and assign the IP address under the FortiGate-VM AzureLab address object.
- D. Delete the address object and recreate a new address object with the type set to FQDN.
Answer: C
Explanation:
Explanation
NEW QUESTION 20
An organization deploys a FortiGate-VM (VM04 / c4.xlarge) in Amazon Web Services (AWS) and configures two elastic network interfaces (ENIs). Now, the same organization wants to add additional ENIs to support different workloads in their environment.
Which action can you take to accomplish this?
- A. None, you cannot create and add additional ENIs to an existing FortiGate-VM.
- B. Create the ENI, shut down FortiGate, attach the ENI to FortiGate, and then start FortiGate.
- C. Create the ENI, attach it to FortiGate, and then restart FortiGate.
- D. Create the ENI and attach it to FortiGate.
Answer: B
NEW QUESTION 21
Refer to the exhibit.
You are deploying a FortiGate-VM in Microsoft Azure using the PAYG/On-demand licensing model. After you configure the FortiGate-VM, the validation process fails, displaying the error shown in the exhibit.
What caused the validation process to fail?
- A. You selected the incorrect resource group.
- B. You selected the Bring Your Own License (BYOL) licensing mode.
- C. You selected the PAYG/On-demand licensing model, but did not associate a valid Azure subscription.
- D. You selected the PAYG/On-demand licensing model, but did not select correct virtual machine size.
Answer: A
NEW QUESTION 22 
Refer to the exhibit. Consider an active-passive HA deployment in Microsoft Azure. The exhibit shows an excerpt from the passive FortiGate-VM node.
If the active FortiGate-VM fails, what are the results of the API calls made by the FortiGate named SSTENTAZFGT-0302? (Choose two.)
- A. SSTENTAZFGT-03-FloatingPIP is assigned to the IP configuration with the name SSTENTAZFGT-
0302-Nic-01, under the network interface SSTENTAZFGT-0302-Nic-01 - B. 172.29.32.71is set as a next hop IP for all routes under FortigateUDR-01
- C. The network interface of the active unit moves to itself
- D. SSTENTAZFGT-03-FloatingPIP public IP is assigned to NIC SSTENTAZFGT-0302-Nic-01
Answer: A,B
NEW QUESTION 23
Refer to the exhibit.
You are configuring an active-passive FortiGate clustering protocol (FGCP) HA configuration in a single availability zone in Amazon Web Services (AWS), using a cloud formation template.
After deploying the template, you notice that the AWS console has IP information listed in the FortiGate VM firewalls in the HA configuration. However, within the configuration of FortiOS, you notice that port1 is using an IP of 10.0.0.13, and port2 is using an IP of 10.0.1.13.
What should you do to correct this issue?
- A. Nothing, in AWS cloud, it is normal for a FortiGate ENI primary IP address to be different than the FortiOS IP address configuration.
- B. Configure FortiOS to use DHCP so that it will get the correct IP addresses on the ports.
- C. Configure FortiOS to use static IP addresses with the IP addresses reflected in the ENI primary IP address configuration (as per the exhibit).
- D. Delete the deployment and start again. You have in put the wrong parameters during the cloud formation template deployment.
Answer: B
NEW QUESTION 24
Customer XYZ has an ExpressRoute connection from Microsoft Azure to a data center. They want to secure communication over ExpressRoute, and to install an in-line FortiGate to perform intrusion prevention system (IPS) and antivirus scanning.
Which three methods can the customer use to ensure that all traffic from the data center is sent through FortiGate over ExpressRoute? (Choose three.)
- A. Enable the redirect option in ExpressRoute to send data center traffic to a user-defined route table
- B. Define a default route where the next hop IP is the FortiGate WAN interface
- C. Configure a user-defined route table
- D. Install FortiGate in Azure and build a VPN tunnel to the data center over ExpressRoute
- E. Configure the gateway subnet as the subnet in the user-defined route table
Answer: A,B,E
NEW QUESTION 25
Refer to the exhibit.
The exhibit shows a topology where multiple connections from clients to the same FortiGate-VM instance, regardless of the protocol being used, are required.
Which two statements are correct? (Choose two.)
- A. The design shows an active-passive FortiGate-VM architecture.
- B. The design shows an active-active FortiGate-VM architecture.
- C. The Cloud Load Balancer Session Affinity setting should use the default value.
- D. The Cloud Load Balancer Session Affinity setting should be changed to CLIENT_IP.
Answer: B,D
NEW QUESTION 26
Your company deploys FortiGate VM devices in high availability (HA) (active-active) mode with Microsoft Azure load balancers using the Microsoft Azure ARM template. Your senior administrator instructs you to connect to one of the FortiGate devices and configure the necessary firewall rules. However, you are not sure now to obtain the correct public IP address of the deployed FortiGate VM and identify the access ports.
How do you obtain the public IP address of the FortiGate VM and identify the correct ports to access the device?
- A. In the configured load balancer, access the health probes section.
- B. In the configured load balancer, access the inbound NAT rules section.
- C. In the configured load balancer, access the backend pools section.
- D. In the configured load balancer, access the inbound and outbound NAT rules section.
Answer: D
NEW QUESTION 27
You are deploying Amazon Web Services (AWS) GuardDuty to monitor malicious or unauthorized behaviors related to AWS resources. You will also use the Fortinet aws-lambda-guarddutyscript to translate feeds from AWS GuardDuty findings into a list of malicious IP addresses. FortiGate can then consume this list as an external threat feed.
Which Amazon AWS services must you subscribe to in order to use this feature?
- A. WAF, Shield, GuardDuty, S3, and DynamoDB.
- B. Inspector, Shield, GuardDuty, S3, and DynamoDB.
- C. GuardDuty, CloudWatch, S3, Inspector, WAF, and Shield.
- D. GuardDuty, CloudWatch, S3, and DynamoDB.
Answer: C
Explanation:
Explanation/Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/ed901ad2-4424-11e9-
94bf-00505692583a/FortiOS_6.2.0_AWS_Cookbook.pdf
NEW QUESTION 28
You have previously deployed an Amazon Web Services (AWS) transit virtual private cloud (VPC) with a pair of FortiGate firewalls (VM04 / c4.xlarge) as your security perimeter. You are beginning to see high CPU usage on the FortiGate instances.
Which action will fix this issue?
- A. Migrate the transit VPNs to new and larger instances (VM08 / c4.2xlarge).
- B. Convert from IPsec tunnels to generic routing encapsulation (GRE) tunnels, for the VPC peering connections.
- C. Convert the transit VPC firewalls into an auto-scaling group and launch additional EC2 instances in that group.
- D. Convert the c4.xlarge instances to m4.xlarge instances.
Answer: C
NEW QUESTION 29
Refer to the exhibit.
Your senior administrator successfully configured a FortiGate fabric connector with the Azure resource manager, and created a dynamic address object on the FortiGate VM to connect with a windows server in Microsoft Azure. However, there is now an error on the dynamic address object, and you must resolve the issue.
How do you resolve this issue?
- A. Run diagnose debug application azd -l on FortiGate.
- B. In the Microsoft Azure portal, set the correct tag values for the windows server.
- C. In the Microsoft Azure portal, access the windows server, obtain the private IP address, and assign the IP address under the FortiGate-VM AzureLab address object.
- D. Delete the address object and recreate a new address object with the type set to FQDN.
Answer: C
NEW QUESTION 30 
Refer to the exhibit. Which two conditions will enable you to segregate and secure the traffic between the hub and the spokes in Microsoft Azure? (Choose two.)
- A. Configure VNet peering between the spokes only.
- B. Configure VNet peering between the hub and spokes.
- C. Implement the FortiGate-VM network virtual appliance (NVA) in the hub and use user-defined routes (UDRs) in the spokes.
- D. Use ExpressRoute to interconnect the hub VNets and spoke VNets.
Answer: B,D
NEW QUESTION 31
You have been asked to secure your organization's salesforce application that is running on Microsoft Azure, and find an effective method for inspecting shadow IT activities in the organization. After an initial investigation, you find that many users access the salesforce application remotely as well as on-premises.
Your goal is to find a way to get more visibility, control over shadow IT-related activities, and identify any data leaks in the salesforce application.
Which three steps should you take to achieve your goal? (Choose three.)
- A. Deploy and configure FortiCASB with a Fortinet FortiCASB subscription license.
- B. Deploy and configure FortiGate with Security Fabric solutions, and FortiCWP with a storage guardian advance license.
- C. Deploy and configure FortiCWP with a workload guardian license.
- D. Configure FortiCASB and set up access rights, privileges, and data protection policies.
- E. Use FortiGate, FortiGuard, and FortiAnalyzer solutions.
Answer: A,D,E
NEW QUESTION 32
Which two statements about the Amazon Cloud Services (AWS) network access control lists (ACLs) are true?
(Choose two.)
- A. Network ACLs are stateless, and inbound and outbound rules are used for traffic filtering.
- B. Network ACLs support allow rules and deny rules.
- C. Network ACLs must be manually applied to virtual network interfaces.
- D. Network ACLs are stateful, and inbound and outbound rules are used for traffic filtering.
Answer: A,B
Explanation:
Explanation/Reference: https://docs.aws.amazon.com/vpc/latest/userguide/vpc-network-acls.html
NEW QUESTION 33
Which two statements about Microsoft Azure network security groups are true? (Choose two.)
- A. Network security groups can be applied to subnets and virtual network interfaces.
- B. Network security groups are stateless inbound and outbound rules used for traffic filtering.
- C. Network security groups are a stateful inbound and outbound rules used for traffic filtering.
- D. Network security groups can be applied to subnets only.
Answer: C,D
NEW QUESTION 34
......
Pass Fortinet NSE7_PBC-6.4 Exam Quickly With Prep4away: https://www.prep4away.com/Fortinet-certification/braindumps.NSE7_PBC-6.4.ete.file.html
NSE7_PBC-6.4 Exam Questions (Updated 2022) 100% Real Question Answers: https://drive.google.com/open?id=1zRsDWvTDoQ3OlE0oO4WpIbKInu3TtxTJ