Nutanix NCM-MCI-5.20 Exam Prep Guide: Prep guide for the NCM-MCI-5.20 Exam
2023 New Preparation Guide of Nutanix NCM-MCI-5.20 Exam
The Nutanix NCM-MCI-5.20 exam is a vendor-neutral certification that is recognized globally. The certification demonstrates the candidate's knowledge and skills in multicloud infrastructure and their ability to work with various cloud platforms. The certification enhances the candidate's credibility and increases their value to their organization. The certification is also an excellent way for professionals to distinguish themselves in a competitive job market.
NEW QUESTION # 96
An administrator knows that the disks in a cluster are out of date and a new firmware is available. For security reasons, these clusters do not have access to the Internet.
Which two steps must be completed to update the firmware? (Choose two.)
- A. Download the updated firmware .tgz file from the Nutanix portal.
- B. Configure LCM with a URL to access the firmware bundle.
- C. Select Upgrade Software, then select disks and upload the updated firmware.
- D. Download a dark site bundle and stage it on an internal webserver.
Answer: B,D
NEW QUESTION # 97
An administrator is implementing a VDI solution. The workload will be a series of persistent desktops in a dedicated storage container within a four-node cluster. Storage optimizations should be set on the dedicated storage container to give optimal performance including during a node failure event.
Which storage optimizations should the administrator set to meet the requirements?
- A. Compression, Deduplication, and Erasure Coding
- B. Compression only
- C. Compression and Deduplication
- D. Deduplication and Erasure Coding
Answer: D
Explanation:
Reference:
NEW QUESTION # 98
An administrator needs to install prism central for their 2550 multi-cluster environment.
How should they deploy the application?
- A. Deploy a large 3-VM Prism Central instance
- B. Deploy a small 1-VM Prism Central instance.
- C. Deploy a large 1-VM Prism Central instance.
- D. Deploy a small 3-VM Prism Central instance.
Answer: A
NEW QUESTION # 99
A customer recently set up Async Replication between Site A and Site B. The customer wants to conduct a planned failover and clicks Activate on Site B.
The customer then runs the following command on Site A:
ncli pd deactivate_and__destroy_vms name=<protection_domain_name>
What does this do to the customer environment?
- A. VMs get deleted from Site A and the protection domain is no longer active.
- B. VMs are powered off on Site A and must be manually powered on at Site B.
- C. Customer must then manually power off VMs at Site A and power them on at Site B.
- D. VMs get deleted from Site B. and the protection domain is now Active.
Answer: A
Explanation:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_10:wc-protection-domain-failback-disaster.html
NEW QUESTION # 100
An administrator needs to make sure an RF2 cluster can survive a complete rack failure without negatively effecting workload performance. The current cluster configuration consists of the following:
* 30 nodes: distributed 10 nodes per rack across three 42U rack
* Each nodes is configured with 40TB usable storage all flash (Cluster Total 1.2 PB Usable)
* Current cluster utilization is 900TB storage
Which configuration changes should be made to make sure that the cluster meets the requirements?
- A. Expanse the cluster by adding 8 nodes to a new 42U rack
- B. Expanse the cluster by adding 3 additional nodes per rack, 9 nodes total.
- C. Expanse the cluster by adding 9 nodes to a new 42U rack
- D. Expanse the cluster by adding 2 additional nodes per rack, 6 nodes total.
Answer: B
NEW QUESTION # 101
An organizations Nutanix Cluster is based on VMware vSphere. The cluster is configured to download software updates automatically. The administration needs to verify and eventually upgrade VMware hypervisor via Prism Ul.
After logging in to Prism, the administrator receives the message shown:
No available versions for upgrade
What is causing the current state?
- A. vSphere binaries need to be manually uploaded.
- B. VMware support has expired, so downloads are not available.
- C. The cluster is unable to connect to reIease-api.nutanix-ccm:8D.
- D. The environment is running the latest vSphere version, so no update is required.
Answer: D
NEW QUESTION # 102
An administrator is managing multiple Windows and Linux VMs connected to Nutanix Volumes. The Linux VMs are experiencing intermittent connectivity issues. The Windows VMs do not experience the same issue.
Which option should the administrator use to resolve this issue?
- A. Set the SCSI timeout value to 60
- B. Add additional disks to the Volume Group
- C. Utilize Jumbo Frames
- D. Utilize a separate subnet for the Linux VMs
Answer: A
NEW QUESTION # 103
An administrator configure Active Directory (AD) authentication for their Nutanix environment. When login in using an AD user account, the login process takes more than one minute to complete. No delay occurs when logging a local account.
What should the administrator confirm to resolve this issue?
- A. Active directory lookups are configured to use Non-Recursive mode.
- B. The service Account Username is correct for the domain.
- C. The domain controller being used is configured as a global catalog server.
- D. The user search base for the group is configured correctly
Answer: A
NEW QUESTION # 104
An administrator is planning to deploy a Nutanix cluster to support a few high-performance VMs. This deployment will have the following considerations:
* Individual VMs will likely generate network throughputs in the range of 90-100Mbps
* Due to the configuration of the VMs, it is unlikely that a node will host more than one or two of them at a time
* Individual VMs will communicate with only a few (one or two) remote hosts at a time
* Multicast will not be used in the environment
* The hosts are connected via two 1GbE network connections
How should the administrator configure the network bonds to meet this requirement while maintaining the simplest switch configuration?
- A. Configure bond0 as balance-lacp
- B. Configure bond0 as balance-sib
- C. Configure bond0 as balance-tcp
- D. Configure bond0 as active-backup
Answer: B
NEW QUESTION # 105
An administrator is migrating 5MB shares from a third-party platform to Nutanix Files with the following characteristics:
* Shares contain user profile directories
* DFS-N will be used
How should the administrator create target shares for this migration?
- A. Create multiple general purpose shares and distribute migrated data as evenly as possible.
- B. Create distributed shares with multiple top-level directories and distribute migrated data.
- C. Create multiple distributed shares and distribute migrated data as evenly as possible.
- D. Create standard shares with multiple top-level directories and distribute migrated data.
Answer: B
NEW QUESTION # 106
What is required to successfully live migrate a VM Between two AHV clusters?
- A. Configure a Protection domain with synchronous replication
- B. Stretch L2 networks across the primary and recovery sites
- C. Both clusters must be managed by the same prism central
- D. Install and Configure the witness VM on a third Site.
Answer: B
NEW QUESTION # 107
Refer to the exhibit.
An administrator has an existing cluster and needs to improve performance using AHV Turbo. Which two items are required to achieve even greater performance? (Choose two.)
- A. VMs have one vCPU configured.
- B. Workloads are multi-threaded.
- C. VMs have more than one vCPU.
- D. VMs have multi-queue disabled.
Answer: B,C
Explanation:
NEW QUESTION # 108
An Administrator has created a Volume Group for a specific VM on an AHV Cluster.
What is the next step required to user vDisk in the VM?
- A. Configure CHAP Authentication
- B. Bring the disk Online
- C. Reboot the VM
- D. Attach the Volume Group to the VM
Answer: D
NEW QUESTION # 109
A customer has two mission-critical applications and needs to have them backed up to a remote location. The remote location is connected using a leased line and has an average latency of 7 ms.
Which Nutanix technology will provide the shortest RPO possible?
- A. Metro Availability
- B. Leap
- C. Asyn&DR
- D. NearSync
Answer: B
NEW QUESTION # 110
What are two types of Protection Domains that Nutanix Offers for data Protection? Choose Two
- A. Consistency Group
- B. Metro Availability
- C. Snapshot
- D. Async DR
Answer: B,D
NEW QUESTION # 111
Refer to the exhibit.
An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.
What must be changed to enable full inter-VM communications?
- A. Change the network the VMs are connected to
- B. The VMs need to have static IP addresses
- C. Change the spanning-tree port type on the switch
- D. Update the switch to specifically allow VLAN 15
Answer: D
NEW QUESTION # 112
An administrator is updating disk firmware using LCM and receives the following message:
"there have been 10 or more cluster services restarts within 15 minutes in the Controller VM" The message appears as each drive is upgraded.
What is the reason this message is being generated?
- A. A drive has been reformatted
- B. A node has been rebalanced
- C. A drive has been ejected
- D. A node has been rebooted
Answer: D
NEW QUESTION # 113
An administrator has a VM that consumes large amounts of storage and has the following characteristics:
* Create large / sequential writes
* Data must be kept for years
* Data is normally only accessed at the end of the year to run report
The administrator decides to use Erasure Coding to save space.
Which feature should the administrator utilize to save space for this VM?
- A. Cache Dedup
- B. Inline Compression
- C. Post-Process Compression
- D. Flash Mode
Answer: C
NEW QUESTION # 114
Refer to the exhibit.
A Nutanix host is connected as shown in the exhibit with br0-up set to active/backup. Physical Switch 1 experiences a power outage causing br0-up to failover to using eth2. The CVM and host become inaccessible. User VMs restart on other hosts in the cluster, which causes a disruption to those VMs.
Which configuration issue likely caused this outage?
- A. The upstream port for eth2 is missing a VLAN.
- B. The user VMs only have one NIC
- C. Bridge br0-up should be configured to use balance-tcp rather than active/backup.
- D. The CVM should have eth1 connected to the OVS.
Answer: A
NEW QUESTION # 115
......
The Nutanix NCM-MCI-5.20 Exam is an excellent opportunity for IT professionals to validate their skills and knowledge in managing and deploying Nutanix cloud infrastructure solutions. The certification exam is recognized globally and provides professionals with a competitive advantage in the job market. The exam helps professionals to demonstrate their expertise in managing and deploying multicloud infrastructure environments, which is a critical skill in today's digital age. Additionally, the certification program provides professionals with access to Nutanix's extensive community of experts, which can help them to stay up-to-date with the latest trends and best practices in cloud infrastructure management.
Nutanix NCM-MCI-5.20 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
Latest Questions NCM-MCI-5.20 Guide to Prepare Free Practice Tests: https://www.prep4away.com/Nutanix-certification/braindumps.NCM-MCI-5.20.ete.file.html