Oct-2021 Realistic DES-1423 Exam Dumps with Accurate & Updated Questions [Q23-Q45]

Share

Oct-2021 Realistic DES-1423 Exam Dumps with Accurate & Updated Questions

DES-1423 Exam Dumps - PDF Questions and Testing Engine


Conclusion

The proper perspective of the Dell DES-1423 exam comes from utilizing the right methods to acquire an awareness of all the subject matters provided. Attending official classes is among these methods. Again, those expecting to hold the high-ranking Dell certificate should be ready to undergo all it takes. So, sit for the test today and boost your career soon!

 

NEW QUESTION 23
In an Isilon Gen 5 environment, what is the maximum number of data stripes for the N+3d:1n1d protection level?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B

Explanation:
References:
324
Isilon Administration and Management participant guide

 

NEW QUESTION 24
When reviewing the actual protection output of N+4/2, what does the number "4" represent?

  • A. FEC stripe units per file system
  • B. FEC stripe units per stripe
  • C. Hard drives used per stripe
  • D. Volume stripes per file system

Answer: B

Explanation:
It's OneFS FEC protection nomenclature for our "hybrid" protection polices. More generally, it's written as:
N+M/b
where "N" is the number of data stripe units in a stripe, "M" is the number of FEC stripe units in a stripe, and "b" is the number of stripe units in a stripe which are allowed to reside on the same node.

 

NEW QUESTION 25
What is the lowest level of storage pool grouping on an Isilon cluster that is user-configurable and created manually or automatically?

  • A. Node pool
  • B. Disk pool
  • C. Neighborhood
  • D. Sub-node pool

Answer: B

Explanation:
Explanation/Reference: https://www.dellemc.com/resources/en-us/asset/white-papers/products/storage/h8321-wp- smartpools-storage-tiering.pdf (10)

 

NEW QUESTION 26
A company plans to build two Isilon clusters in an active-active disaster recovery environment. The initial requirement is to have one access zone for their Finance department. Which recommended directory structure meets the requirement?

  • A. Cluster_A:/ifs/finance/cluster_a/ifs/finance/cluster_bCluster_B:/ifs/finance/cluster_a/ifs/finance/cluster_b
  • B. Cluster_A:/ifs/cluster_a/finance/ifs/cluster_b/financeCluster_B:/ifs/cluster_a/finance/ifs/cluster_b/finance
  • C. Cluster_A:/ifs/finance/ifs/financeCluster_B:/ifs/finance/ifs/finance
  • D. Cluster_A:/ifs/cluster_a/ifs/cluster_bCluster_B:/ifs/cluster_a/ifs/cluster_b

Answer: B

 

NEW QUESTION 27
In an Isilon Gen 5 environment, what is the maximum number of data stripes for the N+3d:1n1d protection level?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B

Explanation:
Explanation/Reference: https://community.emc.com/community/products/isilon/blog/2018/01/17/storage-efficiency- protection-overhead-vs-usable-capacity

 

NEW QUESTION 28
An Isilon administrator has four H600 nodes and eight A2000 nodes in the cluster. The file pool policy is configured to have all new data written to the H600 nodes. After a few weeks, the administrator has some concerns about the available capacity on the H600 nodes.
Which feature should be configured to accept writes, even after the H600 nodes become full?

  • A. GNA
  • B. Spillover
  • C. Virtual Hot Spare
  • D. SmartPools

Answer: B

Explanation:
Explanation/Reference: https://groups.google.com/forum/#!topic/isilon-user-group/CpalY7Jy6Xs

 

NEW QUESTION 29
A Job Engine is running in low space mode and no jobs are in the running state. What is the OneFS8.2 behavior if the AutoBalance job is initiated?

  • A. Job is not started.
  • B. Job is started.
  • C. Job is failed.
  • D. Job is put into the queue.

Answer: B

Explanation:
References:
494 / 495 Autobalance is a space saving job
Isilon Administration and Management participant guide

 

NEW QUESTION 30
On an Isilon cluster, what is a benefit of using SMB Server-Side Copy?

  • A. Allows the file to be copied from one location to another without having to go through the client.
  • B. A secondary copy of the user's file is created to allow multiple users to edit the file simultaneously.
  • C. Allows members of the Administrator's group to manage snapshot copies of files.
  • D. A secondary copy of a file is written to a backup location to assist SyncIQ operations.

Answer: A

 

NEW QUESTION 31
What is the correct sequence of actions performed by OneFS to generate an access token?

Answer:

Explanation:

 

NEW QUESTION 32
A company's Isilon cluster has reached the capacity limit. The cluster consists of eight H500 nodes in a single node pool. Which action can be taken to resolve the capacity issue while new nodes are being delivered?

  • A. Enable GNA
  • B. Activate SmartPools
  • C. Release VHS drives
  • D. Enable Spillover

Answer: B

 

NEW QUESTION 33
A systems administrator needs to change the cluster protection from N+3n to N+2n. Which interfaces can be used?

  • A. PAPI, WebUI, and CLI
  • B. PAPI, WebUI, and SFTP
  • C. SFTP, HTTP, and CLI
  • D. HTTP, WebUI, and CLI

Answer: A

Explanation:
332
Isilon Administration and Management participant guide

 

NEW QUESTION 34
What is a requirement when adding Gen 6 nodes to an existing Isilon Gen 5 cluster?

  • A. NVRAM dependency
  • B. Decreased journal size for storage performance
  • C. Dedicated bootflash drives
  • D. 40 Gb InfiniBand ports

Answer: D

Explanation:
Explanation/Reference: https://community.emc.com/community/products/isilon/blog/2017/05/25/next-gen-nodes

 

NEW QUESTION 35
An Isilon administrator has four H600 nodes and eight A2000 nodes in the cluster. The file pool policy is configured to have all new data written to the H600 nodes. After a few weeks, the administrator has some concerns about the available capacity on the H600 nodes.
Which feature should be configured to accept writes, even after the H600 nodes become full?

  • A. GNA
  • B. Spillover
  • C. Virtual Hot Spare
  • D. SmartPools

Answer: B

 

NEW QUESTION 36
What is the correct sequence of steps in a client read operation?

Answer:

Explanation:

 

NEW QUESTION 37
An administrator wants to enable quotas on a group directory in their Isilon cluster. In addition, the administrator wants to monitor and limit the disk usage. Which type of quotas need to be configured?

  • A. Accounting
  • B. Enforcement
  • C. Soft
  • D. Advisory

Answer: B

Explanation:
References: 409
Isilon Administration and Management participant guide

 

NEW QUESTION 38
An Isilon administrator wants to enable quota notifications for their LDAP users. However, the users' email IDs are not updated in the LDAP environment. What additional configuration needs to be performed?

  • A. Manage local users and groups
  • B. Configure the local provider
  • C. Configure a mapping rule
  • D. Configured the file provider

Answer: C

 

NEW QUESTION 39
Exhibit:

Which access information is represented in the exhibit?

  • A. Synthetic ACL is applied and user "DEES\john" has read access to the file
  • B. Real ACL is applied and group "DEES\sales" has read access to the file
  • C. Synthetic ACL is applied and group "DEES\sales" has read access to the file
  • D. Real ACL is applied and group "DEES\domain users" has read access to the file

Answer: D

 

NEW QUESTION 40
You are configuring the network on a Isilon source cluster. The administrator wants to dedicate a new subnet for replication. Which consideration must be addressed for SyncIQ to work properly?

  • A. SnapshotIQ must be licensed first.
  • B. 10GbE ports must be used for replication
  • C. SyncIQ must run on a dynamic IP pool
  • D. SyncIQ must run on a static IP pool.

Answer: B

 

NEW QUESTION 41
Which OneFS 8.0 feature can be added to an NFSv4 export to assist with seamless failover in the event of a disconnect?

  • A. Transparent failover
  • B. Continuous availability
  • C. Stateful connection
  • D. Stateless connection

Answer: C

Explanation:
Explanation/Reference: https://www.dellemc.com/resources/en-us/asset/white-papers/products/storage/ h17240_wp_isilon_onefs_nfs_design_considerations_bp.pdf (7)

 

NEW QUESTION 42
You have been tasked with designing SyncIQ policies for a systems administrator that requires failover and failback testing. What information should be provided to the administrator?

  • A. SyncIQ supports failback replication policies that specify directory includes or excludes.
  • B. Failback replication policies that specify includes or excludes cannot use historical snapshots.
  • C. Failback replication policies that specify includes or excludes cannot use data encryption.
  • D. Failback replication policies that specify includes or excludes are not supported with SyncIQ.

Answer: D

Explanation:
Explanation/Reference: https://mydocuments.emc.com/pub/en-us/isilon/onefs/7.2.1/ifs-pub-administration-guide-cli/15-ifs- br-data-replication-with-synciq.htm

 

NEW QUESTION 43

Based on the exhibit, what is the actual protection level of the FEATURE.wmv file?

  • A. N+2
  • B. N+2n
  • C. N+2d: 1n
  • D. N+1

Answer: C

 

NEW QUESTION 44
Based on the exhibit, what is the actual protection level of the FEATURE.wmv file?

  • A. N+2
  • B. N+2d: 1n
  • C. N+2n
  • D. N+1

Answer: C

Explanation:
341
Isilon Administration and Management participant guide

 

NEW QUESTION 45
......


Dell EMC PowerScale Specialist Exam Certification Details:

Books / TrainingPowerScale Concepts (ES131STG01028) - On-Demand
PowerScale Administration (MR-1CP-ISIAM) - Classroom
Duration90 mins
Passing Score63%
Exam Price$230 (USD)
Sample QuestionsDell EMC PowerScale Specialist Sample Questions
Number of Questions60
Schedule ExamPearson VUE
Exam NameDell EMC Certified Specialist - Implementation Engineer - PowerScale (DCS-IE)
Exam CodeDES-1423

 

Pass EMC DES-1423 Exam Quickly With Prep4away: https://www.prep4away.com/EMC-certification/braindumps.DES-1423.ete.file.html