[Oct-2021] Updated HCIP Transmission H31-341 Exam Questions BUNDLE PACK
Master The Huawei Content H31-341 EXAM DUMPS WITH GUARANTEED SUCCESS!
NEW QUESTION 19
Which of the following paths are not related to the business?
- A. Client
- B. OCh
- C. ODUk
- D. OSC
Answer: D
NEW QUESTION 20
The steps that must be performed when configuring the Ethernet private line service carried by the PW are as follows: (Multiple Choice)
- A. Configure port DCN
- B. Configure QoS
- C. Configure MPLS tunnel
- D. Configure the UNI port
Answer: A,C,D
NEW QUESTION 21
The setting of alarm reversal is based on:
- A. Port
- B. Alarm
- C. Veneer
- D. Network element
Answer: A
NEW QUESTION 22
Before creating an optical cross-connection, you need to manually configure the corresponding port of the corresponding board as a boundary port, for example, the line-side port of the FIU board between two sites.
- A. TRUE
- B. FALSE
Answer: A
NEW QUESTION 23
Which of the following service layer paths is required when creating OCh using the path method?
- A. Client
- B. OMS
- C. ODUk
- D. OTS
Answer: B
NEW QUESTION 24
Which of the following statements about the modulation technologies of the 40Gbit/s and 100Gbit/s coherent systems are correct?
- A. The modulation technology used in a 100G coherent system is ePDM-QPSK.
- B. The modulation technology used in a 40G coherent system is ePDM-QPSK.
- C. The modulation technology used in a 40G coherent system is ePDM-BPSK.
- D. The modulation technology used in a 100G coherent system is ePDM-BPSK.
Answer: A
NEW QUESTION 25
Which of the following options can reduce the effects of nonlinear effects in the WDM system? (Multiple Choice)
- A. Control optical power
- B. Dispersion management
- C. Advanced light source technology
- D. Using high performance fiber
Answer: A,B,C,D
NEW QUESTION 26
Which of the following signals can be used as input or output signals of an external clock interface?
- A. 2.048 Mbit/s
- B. 34 Mbit/s
- C. 155 Mbit/s
- D. 2.048 MHz
Answer: C
NEW QUESTION 27
Which of the following alarms trigger optical line protection switching?
- A. MUT_LOS
- B. R_LOS
- C. R_LOF
- D. POWER_DIFF_OVER
Answer: B
NEW QUESTION 28
The causes of discrete services are as follows:
- A. A subnet service whose source or sink port is not in the management scope of the U2000 is available.
- B. The logical fiber connection of the NE is inconsistent with the physical fiber connection.
- C. The configuration data on the NE side is not uploaded to the U2000.
- D. The cross-connection configuration on the NE is incorrect.
Answer: C
NEW QUESTION 29
Which of the following subracks does not support the configuration of packet board?
- A. OSN 1800II
- B. OSN 1800V
- C. OSN 8800 T16
- D. OSN 9800 P18
Answer: D
NEW QUESTION 30
When you delete a discrete service, you can first activate it. At this time, you can view the alarm. If there is no alarm such as PS or TU-AIS, it is a garbage service. If there is an alarm, the analysis is incorrect. You need to activate it immediately.
- A. TRUE
- B. FALSE
Answer: A
NEW QUESTION 31
Which of the following description of the extended ECC is correct? (Multiple Choice)
- A. In the automatic extended ECC mode, you need to connect the Ethernet ports of the two NEs with a direct-connected network cable (or a standard network cable through B), extend the ECC, and specify the server and client.
- B. Extended ECC is divided into automatic extended ECC and manual extended ECC. One network element can only support one mode at the same time. These two methods cannot be directly docked.
- C. The scale of the extended ECC network (the sum of the server and the client) must not exceed 8.
- D. Extended ECC recommends to use manual basis, which reduces mutual negotiation between network elements.
Answer: B,C,D
NEW QUESTION 32
An OTN network uses WSMD4 to form a ROADM network element. After the logical fiber is created, the paths that can be directly searched are: (Multiple choice)
- A. OCh
- B. OTS
- C. Client
- D. OMS
Answer: A,B,D
NEW QUESTION 33
Which of the following are the components of general package format of PWE3? (Multiple Choice)
- A. CW (Control Word)
- B. MPLS label
- C. Payload
- D. Type
Answer: A,B,C
NEW QUESTION 34
Which of the following statement is correct?
- A. Deactivation will delete the configuration of the U2000, which has no impact on the device side services.
- B. The optical layer path must be deleted first when the electrical layer path is removed.
- C. The optical layer path and the electrical layer path are independent. It is not necessary to delete the electrical layer path when deleting the optical layer path.
- D. When the OCh path exists, you can directly create a client path. The NMS automatically creates an ODUk path.
Answer: C
NEW QUESTION 35
ESC can also be used at OLA sites.
- A. False
- B. True
Answer: A
NEW QUESTION 36
The OTS path refers to the physical fiber connection between two adjacent OM/OD/OA on the main optical path.
- A. TRUE
- B. FALSE
Answer: B
NEW QUESTION 37
......
Pass Huawei H31-341 Exam – Experts Are Here To Help You: https://www.prep4away.com/Huawei-certification/braindumps.H31-341.ete.file.html