Pass Your MTCNA Dumps as PDF Updated on 2022 With 216 Questions
MikroTik MTCNA Real Exam Questions and Answers FREE
NEW QUESTION 126
For static routing functionality, additionally to the RouterOS 'system' package, you will also need the following software package:
- A. dhcp
- B. advanced-tools
- C. no extra package required
- D. routing
Answer: C
NEW QUESTION 127
During a scan, in order to see all the available wireless frequencies that are supported by the card, the following option must be selected in the wireless card's "Frequency Mode":
- A. regulatory domain
- B. manual txpower
- C. superchannel
Answer: C
NEW QUESTION 128
What command will display the line, protocol, DLCI, and LMI information of an interface?
- A. sh pvc
- B. show frame-relay pvc
- C. show interface
- D. show run
Answer: C
NEW QUESTION 129
How many wireless clients can connect, when wireless card is configured to mode=bridge?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 130
What is the minimal possible wireless configuration to create an Access Point?
- A. WDS
- B. ssid
- C. DFS mode
- D. frequency
- E. band
- F. mode
- G. radio name
- H. scan-list
Answer: F
NEW QUESTION 131
A DHCP server is configured on a LAN interface which is a port on a bridge. The DHCP server does not start.
What could be the reason(s)?
- A. The DHCP server can not run on an interface which is also a bridge port
- B. There might not be an IP address assigned to the LAN Interface
- C. The IP address pool could be incorrectly defined
- D. There may be multiple IP addresses set on the LAN interface
Answer: A
NEW QUESTION 132
If ARP=reply-only is configured on an interface, what will this interface do
- A. Add new MAC addresses in /ip arp list
- B. Accept all IP/MAC combinations listed in /ip arp as static entries
- C. Accept all IP addresses listed in /ip arp as static entries
- D. Accept all MAC-addresses listed in /ip arp as static entries
- E. Add new IP addresses in /ip arp list
Answer: B
NEW QUESTION 133
If you wanted to delete the configuration stored in NVRAM, what would you type?
- A. erase startup
- B. erase running
- C. delete nvram
- D. erase nvram
Answer: A
NEW QUESTION 134
The highest queue priority is
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 135
Please select valid scan-list values in interface wireless configuration:
- A. 5540,5560,5620+5700
- B. 5640~5680
- C. 5560,5620-5700
- D. default,5560,5600,5660-5700
Answer: C,D
NEW QUESTION 136
There are two routes in the routing table:
0 dst-addr=10.1.1.0/24 gateway=5.5.5.5
1 dst-addr=10.1.1.4/30 gateway=5.6.6.6
Which gateway will be used to get to the IP address 10.1.1.6?
- A. 5.5.5.5
- B. 5.6.6.6
- C. both - half of the traffic will be routed through one gateway, half through the other
- D. the required route is not in the routing table
Answer: B
NEW QUESTION 137
Which is a default baud-rate of currently manufactured RouterBOARDs?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 138
If a packet comes to a router and starts a new, previously unseen connection, which connection state would be applied to it?
- A. established
- B. invalid
- C. no connection state would be applied to such packet
- D. new
- E. unknown
Answer: D
NEW QUESTION 139
You want to transfer existing '/ip firewall filter' configuration from one router to a new system.
Choose the best possible way to do:
- A. Export only '/ip firewall filter'
- B. Create backup only of '/ip firewall filter' rules
- C. Export global configuration and remove everything apart from '/ip firewall filter'
- D. Create backup, edit backup file and restore on target router
Answer: A
NEW QUESTION 140
On the advanced menu of the wireless setup there is a parameter called "Area", it works directly with:
- A. None of these
- B. Access List
- C. Connect List
- D. Security Profile
Answer: C
NEW QUESTION 141
Consider the following network diagram. In R1, you have the following configuration:
/ip route
add dst-address=192.168.1.0/24 gateway=192.168.99.2
/ip firewall nat
add chain=srcnat out-interface=Ether1 action=masquerade
On R2, if you wish to prevent all access to a server located at 192.168.1.10 from LAN1 devices, which of the following rules would be needed?
- A. /ip firewall filter add chain=input srcaddress=192.168.99.1 dst-address=192.168.1.10 action=drop
- B. /ip firewall filter add chain=forward srcaddress=192.168.99.1 dst-address=192.168.1.10 action=drop
- C. /ip firewall filter add chain=forward srcaddress=192.168.0.0/24 dst-address=192.168.1.10 action=drop
- D. /ip firewall nat add chain=dstnat srcaddress=192.168.99.1 dst-address=192.168.1.10 action=drop
Answer: A
NEW QUESTION 142
......
Pass MikroTik MTCNA Exam Info and Free Practice Test: https://www.prep4away.com/MikroTik-certification/braindumps.MTCNA.ete.file.html
New 2022 Latest Questions MTCNA Dumps - Use Updated MikroTik Exam: https://drive.google.com/open?id=1nOzFsILEPK60DYw66F0ODwkKGZJSzbKY