[Q34-Q52] Try FCP_ZCS_AD-7.4 Free Now! Real Exam Question Answers Updated [Oct 15, 2025]

Share

Try FCP_ZCS_AD-7.4 Free Now! Real Exam Question Answers Updated [Oct 15, 2025]

Get Ready to Pass the FCP_ZCS_AD-7.4 exam with Fortinet Latest Practice Exam 

NEW QUESTION # 34
Which of the following is a benefit of deploying FortiGate within an Azure environment?
Response:

  • A. Localized data storage
  • B. Increased physical server security
  • C. Reduced physical infrastructure costs
  • D. Increased application runtime

Answer: C


NEW QUESTION # 35
What are the primary considerations for deploying Azure Virtual WAN?
(Choose Three)
Response:

  • A. Regulatory compliance requirements
  • B. Integration with existing WAN solutions
  • C. Geographic distribution of physical sites
  • D. Expected traffic load
  • E. The need for application layer firewalls

Answer: B,C,D


NEW QUESTION # 36
Which Azure feature enables an organization (tenant) to manage and secure users, groups, and permissions within a single domain?
Response:

  • A. Azure Cosmos DB
  • B. Azure Kubernetes Service (AKS)
  • C. Azure Microsoft Entra ID
  • D. Azure Active Directory B2C

Answer: C


NEW QUESTION # 37
Refer to the exhibits.


A high availability (HA) active-active FortiGate with Elastic Load Balancing (ELB) and Internal Load Balancing (ILB) was deployed with a default setup to filter traffic to a Linux server running Apache server.
Ports 80 and 22 are open on the Linux server, and on FortiGate a VIP and firewall policy are configured to allow traffic through ports 80 and 22. Traffic on port 80 is successful, but traffic on port 22 is not detected by FortiGate.
What configuration changes could you perform to allow SSH traffic?

  • A. Add a new Inbound NAT rule
  • B. Configure a customized port under the Frontend IP configuration
  • C. Add a new Azure load balancing rule
  • D. Include the Linux server in the back-end pool options

Answer: A

Explanation:
Since port 80 traffic is reaching the FortiGate (as shown in the sniffer output) but port 22 traffic is not, the issue lies before the FortiGate, at the Azure Load Balancer level. Azure Load Balancers require an Inbound NAT rule to forward specific ports (like SSH on port 22) to a specific backend VM. Creating a new Inbound NAT rule for port 22 will allow SSH traffic to be properly routed to the FortiGate VM.


NEW QUESTION # 38
What does Azure''s Platform as a Service (PaaS) offering eliminate the need for?
Response:

  • A. Internet connectivity
  • B. Management of underlying infrastructure
  • C. Application development frameworks
  • D. Business analysis tools

Answer: B


NEW QUESTION # 39
What capability does Azure Route Server provide to enterprise networks?
Response:

  • A. Automated patch management
  • B. Data lifecycle management
  • C. Intrusion detection and prevention
  • D. Seamless route exchange with Azure virtual networks

Answer: D


NEW QUESTION # 40
Which Azure component plays a critical role in managing and routing communication between different Azure services?
Response:

  • A. Azure Event Grid
  • B. Azure Functions
  • C. Azure Service Bus
  • D. Azure Logic Apps

Answer: C


NEW QUESTION # 41
What is a limitation of the Network Security Groups (NSGs) in Azure?

  • A. NSGs cannot be applied to individual virtual machines.
  • B. NSGs operate at the application layer, limiting their effectiveness in the network layer.
  • C. NSGs are applied only to vNICs.
  • D. NSGs allow the filtering of inbound traffic only.

Answer: C

Explanation:
A limitation of NSGs is that they are applied only at the subnet level or to network interfaces (vNICs), not directly to other resources like load balancers or application gateways. This means granular application-layer filtering is not supported, and NSGs primarily operate at Layers 3 and 4.


NEW QUESTION # 42
How does Azure Firewall contribute to your network''s security architecture?
Response:

  • A. By filtering incoming and outgoing network traffic based on defined security rules
  • B. By offering content delivery network services
  • C. By providing shared access signatures
  • D. By managing virtual network connections

Answer: A


NEW QUESTION # 43
What advantages does deploying Azure Virtual WAN bring to a multi-regional organization?
(Choose Two)
Response:

  • A. Improved global reach to Azure services
  • B. Lower overall network latency
  • C. Enhanced local security on physical devices
  • D. Simplified patch management

Answer: A,B


NEW QUESTION # 44
Refer to the exhibits.

You are configuring an SDN connector for Azure on a FortiGate device You completed all the required steps on the Azure side. While configuring the FortiGate side, you notice that you did not save the client secret used in the Azure App Registration.
What is the quickest way to obtain the value of the client secret?

  • A. Create a new resource group
  • B. Create a new client secret
  • C. Create a new external connector for Azure
  • D. Create a new app registration

Answer: B

Explanation:
Azure does not allow you to view an existing client secret's value after creation for security reasons. If you did not save the client secret when it was first generated, the quickest and only option is to create a new client secret under the existing app registration and use the new value in your FortiGate configuration.


NEW QUESTION # 45
What are the core components of the Azure public cloud architecture?
(Choose Two)
Response:

  • A. Azure Blob Storage
  • B. Azure Virtual Machines
  • C. On-premises data centers
  • D. Local area networks

Answer: A,B


NEW QUESTION # 46
Refer to the exhibit.

A high availability, active-active FortiGate with Elastic Load Balancing (ELB) and Internal Load Balancing (ILB) was deployed in your Azure environment.
Which tools can you use to configure synchronization? (Choose two.)

  • A. Software-defined network (SDN) Fabric Connector
  • B. Autoscale
  • C. FortiManager
  • D. Heartbeat interfaces
  • E. FortiGate Clustering Protocol (FGCP)

Answer: D,E

Explanation:
In a FortiGate active-active HA deployment in Azure, synchronization between instances is achieved using:


NEW QUESTION # 47
Refer to the exhibit.

You are troubleshooting a network connectivity issue between two VMs that are deployed in Azure.
One VM is a FortiGate that has one interface in the DMZ subnet, which is in the Production VNet. The other VM is a Windows Server in the Servers subnet, which is also in the Production VNet. You cannot ping the Windows Server from the FortiGate VM.
What is the reason for this?

  • A. By default, Azure does not allow ICMP traffic between subnets
  • B. You have not created a VPN to allow traffic between those subnets
  • C. The firewall in the Windows VM is blocking the traffic
  • D. You have not configured a user-defined route for this traffic

Answer: C

Explanation:
The FortiGate VM and the Windows Server VM are in different subnets but within the same Production virtual network, which means they can communicate by default unless restricted. Azure allows ICMP between subnets, but Windows VMs have ICMP blocked by default in their firewall settings. Therefore, the likely reason for the ping failure is that the Windows Server's firewall is blocking ICMP (ping) traffic.


NEW QUESTION # 48
Which Azure service is directly involved in building, testing, deploying, and managing applications and services through Microsoft-managed data centers?
Response:

  • A. Azure ExpressRoute
  • B. Azure Active Directory
  • C. Azure Cosmos DB
  • D. Azure DevOps

Answer: D


NEW QUESTION # 49
Which scenarios are ideal for deploying Azure Virtual WAN?
(Choose Two)
Response:

  • A. Organizations requiring optimized and automated branch connectivity
  • B. Local data storage for compliance
  • C. High-bandwidth content delivery networks
  • D. Global transit network architecture

Answer: A,D


NEW QUESTION # 50
What is a key advantage of the branch-to-hub to hub-to-branch topology in an Azure virtual WAN?

  • A. Load balancing enabled by the simultaneous connection of each branch to multiple hubs
  • B. Increased security through isolated connections between branches and hubs
  • C. Improved branch-to-branch communication for faster data transfer
  • D. Enhanced scalability enables communication between branch offices

Answer: C

Explanation:
The branch-to-hub to hub-to-branch topology in Azure Virtual WAN enables efficient branch-to-branch communication by routing traffic through connected hubs. This improves data transfer speed and reliability between branches without needing direct connections between all sites, simplifying management while maintaining performance.


NEW QUESTION # 51
Why would you use a user-defined route in Azure?

  • A. To have the traffic from the other VMs inspected by FortiGate
  • B. To allow communication between FortiGate VMs on two subnets in the same VNET
  • C. To manage user authentication and access control
  • D. To allow inbound management access to FortiGate VMs

Answer: A

Explanation:
A user-defined route (UDR) in Azure is used to redirect traffic from other VMs through a FortiGate VM for inspection. By modifying the routing table, you ensure that outbound or inter-subnet traffic is sent to the FortiGate as the next hop, enabling traffic filtering, logging, and security enforcement.


NEW QUESTION # 52
......


Fortinet FCP_ZCS_AD-7.4 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Azure Route Server Concepts: This section of the exam measures skills of a Cloud Engineer and covers the basics of Azure Route Server. The focus is on understanding what the Azure Route Server is, how it functions within a virtual network, and how it simplifies the management of dynamic routing by automating route exchange with network virtual appliances.
Topic 2
  • Fortinet Product Deployment: This section of the exam measures skills of a Network Security Engineer and covers the implementation of Fortinet products within Azure environments. The topics include deploying individual FortiWeb and FortiGate instances, integrating FortiGate with Azure’s software-defined networking, and applying best practices for secure and efficient deployments of Fortinet solutions in the cloud.
Topic 3
  • VPN Solutions in Azure: This section of the exam measures skills of a Network Security Engineer and addresses secure connectivity between Azure and on-premises environments. Candidates will review the different site-to-site VPN options available in Azure, configure tunnels between FortiGate devices and Azure VPN gateways, and understand how Azure Virtual WAN enhances global connectivity.
Topic 4
  • Azure Virtual WAN: This section of the exam measures skills of a Cloud Engineer and explains the concept and deployment of Azure Virtual WAN. It focuses on building large-scale, optimized, and automated branch connectivity with Azure regions and services using virtual WAN hubs, improving cloud-based networking efficiency and scalability.
Topic 5
  • Azure Public Cloud Concepts: This section of the exam measures skills of a Cloud Engineer and covers foundational knowledge of public cloud computing, with a focus on Azure. Candidates are expected to understand core cloud concepts and how Azure implements them through services such as compute, storage, and networking. It also includes basic elements of Azure networking and built-in security services that support cloud-native operations.

 

Pass Your Next FCP_ZCS_AD-7.4 Certification Exam Easily & Hassle Free: https://www.prep4away.com/Fortinet-certification/braindumps.FCP_ZCS_AD-7.4.ete.file.html

Get Prepared for Your FCP_ZCS_AD-7.4 Exam With Actual Fortinet Study Guide!: https://drive.google.com/open?id=1tEDOeW4S50ENconSUaMQ4cnVfHoX6o_k