Real JN0-682 are Uploaded by Prep4away provide 2024 Latest JN0-682 Practice Tests Dumps.
All JN0-682 Dumps and Data Center, Professional (JNCIP-DC) Training Courses Help candidates to study and pass the Data Center, Professional (JNCIP-DC) Exams hassle-free!
To obtain the JNCIP-DC certification, candidates must pass the JN0-682 exam. JN0-682 exam consists of 65 multiple-choice questions and has a time limit of 120 minutes. JN0-682 exam is conducted online and is proctored, ensuring the integrity of the certification. The JNCIP-DC certification is highly valued in the industry, as it demonstrates an individual's proficiency in implementing and managing complex data center networks. Data Center, Professional (JNCIP-DC) certification is ideal for individuals who are looking to advance their careers in the field of data center networking and gain recognition for their knowledge and skills.
NEW QUESTION # 34
Which protocol replicates forwarding information between MC-LAG peers?
- A. LLDP
- B. VCCP
- C. ICCP
- D. VRRP
Answer: C
Explanation:
ICCP (Inter-Chassis Control Protocol) is used to replicate forwarding information between MC-LAG (Multi-Chassis Link Aggregation Group) peers. It coordinates the state and roles of the MC-LAG peers and ensures consistent forwarding state between them.
NEW QUESTION # 35
Which two statements are true Virtual Chassis? (Choose two.)
- A. By default, Junos switches are in non-mixed mode virtual chassis.
- B. By default, Junos switches are in a mixes mode Virtual Chassis
- C. The request virtual-chassis mode fabric reboot command will set the Virtual Chassis to mixed mode.
- D. The request virtual-chassis mode fabric reboot command will set the Virtual Chassis to fabric mode with similar devices
Answer: B,C
NEW QUESTION # 36
You are deploying a VXLAN using signaling overlay network in your new data center. You are able to establish your MP BGP peering session and see your EVPN routes, but traffic will not traverse the VXLAN using signaling overlay network.
What is a solution to this problem?
- A. Enable the mtu-discovery feature on the MP peering sessions between VXLAN ANs EVPN signaling peers.
- B. Increase the physical MTU on all ports on all devices participating in VXLAN using EVPN signaling.
- C. Increase the protocol MTU on all devices participating in VXLAN using EVPN signaling
- D. Increase the MTU on the logical VTEP source interface of all devices participating in VXLAN using EVPN signaling.
Answer: B
NEW QUESTION # 37
You have a two spine and four leaf CRB topology and you must ensure that the hosts connected to the leaf devices have reachability to all IRB interface addresses, including the local spine IRB addresses, and the virtual gateway address.
Which two configuration parameters must be used to accomplish this task? (Choose two.)
- A. Configure virtual-gateway-accept-data under the IRB interface.
- B. Configure a spine-to-spine BGP peering as part of the overlay.
- C. Configure a spine-to-spine EVPN peering as part of the routing instance.
- D. Configure proxy-macip-advertisement under the IRB interface.
Answer: B,C
NEW QUESTION # 38
Referring to the exhibit, not all routes are being exchanged by EBGP peers.
In this scenario, which BGP parameter would solve this problem?
- A. mulcihop
- B. as-override
- C. mulcipach mulciple-as
- D. mulcipach
Answer: B
NEW QUESTION # 39
Referring to the exhibit, which statement is correct?
- A. The exhibit shows a collapsed fabric architecture.
- B. The exhibit shows a 3-stage IP fabric architecture.
- C. The exhibit does not represent a valid fabric architecture.
- D. The exhibit shows a 5-stage IP fabric architecture.
Answer: D
NEW QUESTION # 40
Referring to the exhibit,
which two statements are correct? (Choose two.)
- A. The source tunnel IP address is 192.168.100.11.
- B. There are two tunnels to the remote endpoint.
- C. There is one tunnel to the remote endpoint.
- D. The irb. 0 interface is the remote tunnel endpoint interface.
Answer: A,C
NEW QUESTION # 41
You are troubleshooting a connectivity issue across a VXLAN overlay network. In the exhibit, you are using the ping overlay command from a local VTEP residing on a OFX 5120 to a remote VTEP residing on a separate QFX5120.
What is the problem in this situation?
- A. VXLAN VN1100 is not configured on both end points.
- B. VXLAN VN1100 is not configured on the remote VTEP.
- C. The VXLAN controller is down.
- D. VXLAN VN1100 is not configured on the local VTEP
Answer: B
NEW QUESTION # 42
Exhibit.
The two data centers shown in the exhibit need to be connected using EVPN.
Which two statements are correct in this situation? (Choose two.)
- A. Hosts in VLAN 202 can communicate using Layer 2 between data centers.
- B. Hosts in VLAN 10 can communicate with hosts in Data Center 2 using Layer 2.
- C. Hosts in VLAN 202 can communicate using Layer 3 between data centers.
- D. Hosts in VLAN 10 can communicate with hosts in Data Center 2 using Layer 3.
Answer: A,D
NEW QUESTION # 43
You are building a new IP fabric data center underlay network and want to ensure predicted load- balancing behavior for traffic, traversing the fabric. What are two approaches you should take to satisfy the requirement in this scenario? (Choose two.)
- A. Ensure that all spine devices are the same switched mode.
- B. Ensure that all uplinks are 40GbE.
- C. Ensure that every leaf node has an uplink spine node
- D. Ensure that every node has a link to every other leaf node
Answer: A,C
Explanation:
A) Ensuring that all spine devices are of the same type (switched mode) can contribute to predictable load-balancing behavior due to consistent handling of traffic across all spine nodes.
C) Ensuring that every leaf node has an uplink to every spine node helps in achieving even load distribution and redundancy, contributing to predictable load-balancing in the fabric.
NEW QUESTION # 44
You are building an IP fabric underlay for your data center. You are asked to ensure that the two spine devices are in the same AS (65000) while the six leaf devices are in a different AS (65512).
In this scenario, which two statements are correct by default? (Choose two.)
- A. All BGP routes advertised by a leaf device will be rejected on the spine devices.
- B. All BGP routes advertised by a leaf device will be accepted on the spine devices.
- C. A leaf device will reject all BGP routes received from the spine that were originated from another leaf device.
- D. A leaf device will accept all BGP routes received from the spine that were originated from another leaf device.
Answer: B,D
NEW QUESTION # 45
What are three functions supported by the Contrail Command user interface? (Choose two.)
- A. Onboarding of an IP fabric
- B. Integrated syslog collector
- C. Enabling VM-to-BMS bridging
- D. Creating virtual network
- E. Configuring management domains
Answer: B,D,E
NEW QUESTION # 46
You are configuring an IP Fabric in your data center and you are trying to load-balance traffic across multiple
equal-cost BGP routes. You have enabled multipath, but the traffic is not being load-balanced.
Referring to the exhibit, what will solve this problem?
- A. You should apply the load-balance policy as an export policy for the BGP neighbor
- B. You should apply load-balance policy as an import policy to the forwarding table
- C. You should apply the load-balance policy as an export policy to the forwarding table
- D. You should apply the load-balance policy as an export policy to the BGP neighbor
Answer: C
NEW QUESTION # 47
You are designing an EBGP IP fabric for a multi-side data center. In this scenario, which two statements are true? (Choose two.)
- A. Public AS numbers must be used
- B. The same AS number should be used on all devices across all data centers.
- C. Different AS numbers should be used on all devices.
- D. Private AS numbers can be used.
Answer: B,D
Explanation:
A) In a multi-site data center design using EBGP (External Border Gateway Protocol), using the same AS (Autonomous System) number across all devices in all data centers can simplify the design and routing policies.
C) Private AS numbers can be used for an EBGP IP fabric in a multi-site data center environment. This is a common practice as these AS numbers are not intended to be used on the public internet and are suitable for internal network use.
NEW QUESTION # 48
Host1 and host2 are connected to an EVPN signaled VXLAN overlay, and must have Layer 3 connectivity.
The VNI and VLAN assignments are shown in the exhibit.
In this scenario, which two statements are true? (Choose two.)
- A. The ESI assigned to the host1 link will be different from the ESI assigned to the host link.
- B. The VNI assigned to the host1 link must be same as the VNI assigned to the host2 link.
- C. A Layer 3 gateway can be configured on the leaf devices.
- D. A layer 3 gateway can be configured on the spine devices.
Answer: C,D
NEW QUESTION # 49
Referring to the exhibit, not all routes are being exchanged by EBGP peers.
In this scenario, which BGP parameter would solve this problem?
- A. mulcihop
- B. as-override
- C. mulcipach mulciple-as
- D. mulcipach
Answer: B
NEW QUESTION # 50
You are asked to build a single export policy that can be applied to all devices to advertise only loopback IP addresses in the 172.16.0.0/24 subnet into your EBGP IP fabric. In this scenario, which two solutions would accomplish this task? (Choose two.) A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: C
NEW QUESTION # 51
What is an advantage that EVPN has over VPLS when used for DC I?
- A. transparent BPDU transport
- B. reverse path forwarding
- C. active/standby multihoming
- D. mass MAC withdrawal
Answer: C
NEW QUESTION # 52
You host a multitenant data center that runs VMware. You must perform deep packet inspection on all
inter-tenant traffic that is flowing between the VMs within the same hypervisor. Your solution must provide
the security services without needing to leave the physical device.
In this scenario, what should you do to solve this problem?
- A. Use VLANs to isolate each tenant's networks and use an SRX Series device to evaluate inter-tenant
traffic. - B. Use a VLANs to isolate each tenant's network and use IP tables to evaluates inter-tenant traffic.
- C. Use separate vswitches to isolate each-tenant's network and use and use a vSRX device to evaluate
inter-tenant traffic. - D. Use a vMX device to isolate each tenant's network and use firewall filters to evaluate inter-tenant
traffic.
Answer: C
NEW QUESTION # 53
......
Valid Way To Pass Juniper's JN0-682 Exam with : https://www.prep4away.com/Juniper-certification/braindumps.JN0-682.ete.file.html
Free Test Engine For Data Center, Professional (JNCIP-DC) Certification Exams: https://drive.google.com/open?id=1ZH4zI3qPIShaV0nTBFAKd3XzvWoXjOQz