100% Pass Your 500-920 Exam Dumps at First Attempt with Prep4away
Penetration testers simulate 500-920 exam PDF
NEW QUESTION 10
After installing a new UCS M4 server, which two Cisco Integrated Management Controller connectivity options do you have? (Choose two )
- A. XML API Access
- B. Web Access
- C. In-band Access
- D. Out-of-Band Access
- E. SNMP
Answer: A,C
NEW QUESTION 11
Which statement regarding the UCS C-senes connectivity modes best describes connectivity options in a UCS Manager integrated environment?
- A. All UCS C-series servers in a single UCS Manager domain must share the same connectivity model
- B. UCS C-series servers may be connected with or without the use of Fabric Extenders (FEX) in environments running UCS Manager Software Release 2 2 or later
- C. UCS C-series servers must be connected to Fabric Interconnects using Fabric Extenders (FEX)
- D. UCS C-series servers may be connected to multiple UCS Manager domains at the same time
Answer: B
NEW QUESTION 12
Which two formats can be configured for Cisco's Call Home email message? (Choose two )
- A. JSON
- B. Full text
- C. CSV
- D. XML
Answer: B,D
Explanation:
Call Home Message Formats The Call Home feature offers the following message formats: * Short Text - Suitable for pagers or printed reports. * Plain Text - Full formatted message information suitable for human reading. * XML - Matching readable format using Extensible Markup Language (XML) and Adaptive Markup Language (AML) document type definitions (DTDs). The XML format enables communication with the Cisco TAC. For user-defined destination profiles, the format options are long-text, short-text, or XML. The default is XML. For the predefined Cisco TAC profile, only XML is allowed.
Reference:
http://www.audentia-gestion.fr/cisco/smart-call-home-feature-guide-1611.pdf
NEW QUESTION 13
A Hard Drive (HDD) has been hot swapped in a UCS server blade, however, the UCS Manager GUI is not displaying updated metrics about the replacement drive. What action will be required to properly display updated metrics?
- A. Remove and re-insert the server blade HDD controller mezzanine card
- B. Use the CLI, since HDD metrics cannot be displayed with the UCS Manager GUI
- C. Reboot the server.
- D. Reboot the Fabric Interconnects
Answer: A
NEW QUESTION 14
Which two ports on a pair of Cisco Fabric Interconnects must be properly cabled for the pair to form a cluster? (Choose two )
- A. L2 > L1
- B. L1 > L1
- C. L2 > L2
- D. L1 > L2
Answer: B,C
NEW QUESTION 15
Which Cisco UCS internal component maintains the UCS XML database, manages the FSM stages and operations and instructs the Application Gateway to perform operations on physical and logical elements?
- A. Cisco UCS Manager
- B. Cisco Application Gateways
- C. Cisco Data Management Engine
- D. Cisco Finite State Machine
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/System-Monitoring/3-1/b_UCSM_GUI_System_Monitoring_Guide_3_1/b_UCSM_GUI_System_Monitoring_Guide_3_1_chapter_0100.html
NEW QUESTION 16
Which two statements describes connecting the IO Modules in the UCS chassis to the Fabric interconnects? (Choose two )
- A. Connect Fl-A to IOM A and IOM B in each chassis
- B. Connect Fl-B to the IOM B of each chassis
- C. Connect Fl-A to the IOM A of each chassis
- D. Connect Fl-B to IOM A and IOM B in each chassis
- E. Connect Fl-A to the IOM B of each chassis
- F. Connect Fl-B to the IOM A of each chassis
Answer: B,C,E
NEW QUESTION 17
When configuring UCS SAN Connectivity to a 3rd Party FibreChannel Storage Array that is connecting directly to the UCS Fabric Interconnects, which option is Cisco recommended'?
- A. Connect the Storage Array to a RC Storage Port and Enable NPV Mode on the UCS Fabric Interconnects
- B. Connect the Storage Array to an Appliance Port and Enable NPV Mode on the UCS Fabric Interconnects
- C. Direct connectivity between UCS Fabric Interconnects and FibreChannel Storage Arrays is not supported
- D. Connect the Storage Array to a FC Storage Port and Enable Switching Mode on the UCS Fabric Interconnects
- E. Connect the Storage Array to an Appliance Port and Enable Switching Mode on the UCS Fabric Interconnects
Answer: D
NEW QUESTION 18
Which command sequence is required to reset Cisco Integrated Management Controller (IMC) of a Cisco UCS Server?
- A. connect cimc | reset | commit
- B. connect cimc | reset | validate
- C. scope cimc | reset | commit-buffer
- D. scope cimc | reset | validate
Answer: C
NEW QUESTION 19
Which two components are required when the integration of Cisco UCS C-series servers within a Cisco UCS Manager Direct Connect mode? (Choose two )
- A. Compatible Cisco UCS Manager version
- B. Compatible UCS 6200 or 6300 Fabric Interconnects
- C. Cisco Management Controller
- D. Compatible Cisco Nexus Fabric Extenders
- E. Compatible UCS VIC adapter installed via the server's PCIe or MLOM slot
Answer: B,E
NEW QUESTION 20
If a Cisco UCS B-Series server fails to initialize, which method of access is required to troubleshoot?
- A. Use Cisco UCS Manager API to troubleshoot initialization
- B. Use direct console access to troubleshoot initialization
- C. Use KVM console to troubleshoot initialization
- D. Use Cisco UCS Manager GUI to troubleshoot initialization
Answer: C
NEW QUESTION 21
The UCS Chassis Discovery Policy has been set to four and a new chassis is connected with two links What is the resulting chassis recognition action?
- A. The chassis will be recognized and both links will be active
- B. The chassis will be recognized but only one of the links will be active.
- C. The Chassis Discovery Policy will automatically reset to two links, since it always tracks the physical connections
- D. The chassis will not be recognized
Answer: D
NEW QUESTION 22
What is the likely cause of an intermittent SAN Boot fails?
- A. LUN ID Mismatch
- B. FCoE used instead of FC
- C. Misconfigured SAN boot target in the boot policy of the service profile
- D. Wrong boot order in the service profile
Answer: C
NEW QUESTION 23
When troubleshooting UCS initialization issues that require Fabric Interconnect reboots, which Fabric Interconnect should be rebooted first?
- A. The subordinate Fabric Interconnect
- B. The Cisco UCS Manager will determine with Fabric Interconnect to reboot
- C. The primary Fabric Interconnect
- D. Both Fabric Interconnects must be rebooted simultaneously
Answer: C
NEW QUESTION 24
What is the next step after performing a UCS firmware upgrade, and downloading the latest drivers both for your RAID Controller and your Fibre Channel HBA?
Check the HCL
- A. Test device driver compatibility
- B. No need to do anything Drivers are automatically installed for you
- C. No Drivers are needed in a UCS environment
- D. Apply the device driver update to the devices
Answer: A
NEW QUESTION 25
What three options should be verified, when you are able to connect to Cisco UCS Manager, but unable to open a KVM session to a blade? (Choose three)
- A. Verify the KVM IP Address is on the same subnet as the Fabric Interconnect management address
- B. Confirm the IP Address assigned to the KVM is not a duplicate IP
- C. Confirm the KVM IP Address is added to the route table in Cisco UCS Manager
- D. Confirm the IP Address assigned to UCS Manager is the same as the KVM address
- E. Verify TCP port 2068 is not blocked by an ACL or Firewall
- F. Verify the KVM IP Address is on the same ip subnet as the virtual machines
Answer: B,C,E
NEW QUESTION 26
......
All 500-920 Dumps and Training Courses: https://www.prep4away.com/Cisco-certification/braindumps.500-920.ete.file.html