[Dec-2024] AZ-104 Dumps are Available for Instant Access using Prep4away
AZ-104 Dumps 2024 - New Microsoft AZ-104 Exam Questions
NEW QUESTION # 43
You have an Azure subscription that has the public IP addresses shown in the following table.
You plan to deploy an instance of Azure Firewall Premium named FW1.
Which IP addresses can you use?
- A. IP1 and lP2 only
- B. IP1, IP2, and IP5 only
- C. IP1, IP2, IP4, and IP5 only
- D. IP2 Only
Answer: C
Explanation:
https://learn.microsoft.com/en-us/azure/virtual-network/ip-services/public-ip-addresses#at-a-glance Azure Firewall
- Dynamic IPv4: No
- Static IPv4: Yes
- Dynamic IPv6: No
- Static IPv6: No
https://learn.microsoft.com/en-us/azure/virtual-network/ip-services/configure-public-ip-firewall Azure Firewall is a cloud-based network security service that protects your Azure Virtual Network resources.
Azure Firewall requires at least one public static IP address to be configured. This IP or set of IPs are used as the external connection point to the firewall. Azure Firewall supports standard SKU public IP addresses. Basic SKU public IP address and public IP prefixes aren't supported.
NEW QUESTION # 44
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains the virtual machines shown in the following table.
You deploy a load balancer that has the following configurations:
*Name: LB1
*Type: Internal
*SKU: Standard
*Virtual network: VNET1
You need to ensure that you can add VM1 and VM2 to the backend pool of LB1.
Solution: You create a Standard SKU public IP address, associate the address to the network interface of VM1, and then stop VM2.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
NEW QUESTION # 45
You have an Azure subscription named Subscription1 that contains the quotas shown in the following table.
You deploy virtual machines to Subscription1 as shown in the following table.
Answer:
Explanation:
NEW QUESTION # 46
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure Active Directory (Azure AD) tenant named Adatum and an Azure Subscription named Subscription1. Adatum contains a group named Developers. Subscription1 contains a resource group named Dev.
You need to provide the Developers group with the ability to create Azure logic apps in the Dev resource group.
Solution: On Subscription1, you assign the Logic App Operator role to the Developers group.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation:
The Logic App Operator role only grants the ability to read, enable, disable, and run logic apps. It does not grant the ability to create logic apps. To create logic apps, you need to assign the Logic App Contributor role or a higher-level role such as Owner or Contributor. Then, Reference: [Built-in roles for Azure resources] [Azure Logic Apps permissions and access control]
NEW QUESTION # 47
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription named Subscription1 that contains the resources shown in the following table.
VM1 connects to a virtual network named VNET2 by using a network interface named NIC1.
You need to create a new network interface named NIC2 for VM1.
Solution: You create NIC2 in RG2 and West US.
Does this meet the goal?
- A. Yes
- B. NO
Answer: A
Explanation:
Explanation
The virtual machine you attach a network interface to and the virtual network you connect it to must exist in the same location, here West US, also referred to as a region.
References:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-network-interface
NEW QUESTION # 48
You have an Azure subscription that contains the following users in an Azure Active Directory tenant named contoso.onmicrosoft.com:
User1 creates a new Azure Active Directory tenant named external.contoso.onmicrosoft.com.
You need to create new user accounts in external.contoso.com.onmicrosoft.com.
Solution: You instruct User2 to create the user accounts.
- A. Yes
- B. No
Answer: A
Explanation:
Explanation
Only a global administrator can add users to this tenant.
References:
https://docs.microsoft.com/en-us/azure/devops/organizations/accounts/add-users-to-azure-ad
NEW QUESTION # 49
You have an Azure subscription that is linked to an Azure AD tenant. The tenant contains the custom role-based access control (RBAC) roles shown in the following table.
From the Azure portal, you need to create two custom roles named Role3 and Role4. Role3 will be an Azure subscription role. Role4 will be an Azure AD role. Which roles can you clone to create the new roles? To answer, select the appropriate options in the answer area.
Answer:
Explanation:
NEW QUESTION # 50
You have an Azure Active Directory (Azure AD) tenant that contains three global administrators named Admin1, Admin2, and Admin3.
The tenant is associated to an Azure subscription. Access control for the subscription is configured as shown in the Access control exhibit. (Click the Exhibit tab.)
You sign in to the Azure portal as Admin1 and configure the tenant as shown in the Tenant exhibit. (Click the Exhibit tab.)
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
They are all Global admins so they can all modify user permission. i.e add self as owner etc.
You can be GA in one of the subscription, it doesn't mean that you can create the resources in all subscription.
As a Global Administrator in Azure Active Directory (Azure AD), you might not have access to all subscriptions and management groups in your directory. Azure AD and Azure resources are secured independently from one another. That is, Azure AD role assignments do not grant access to Azure resources, and Azure role assignments do not grant access to Azure AD.
However, if you are a Global Administrator in Azure AD, you can assign yourself access to all Azure subscriptions and management groups in your directory Reference:
https://docs.microsoft.com/en-gb/azure/role-based-access-control/elevate-access-global-admin
NEW QUESTION # 51
You have an Azure subscription named Subscription1.
In Subscription1, you create an Azure web app named WebApp1. WebApp1 will access an external service that requires certificate authentication.
You plan to require the use of HTTPS to access WebApp1.
You need to upload certificates to WebApp1.
In which formats should you upload the certificate? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 52
You have an Azure subscription that contains the resources shown in the following table.
VMSS1 is set to VM (virtual machines) orchestration mode.
You need to deploy a new Azure virtual machine named VM1, and then add VM1 to VMSS1.
Which resource group and location should you use to deploy VM1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Box 1: RG1, RG2, or RG3
The resource group stores metadata about the resources. When you specify a location for the resource group, you're specifying where that metadata is stored.
Box 2: West US only
Note: Virtual machine scale sets will support 2 distinct orchestration modes:
ScaleSetVM - Virtual machine instances added to the scale set are based on the scale set configuration model.
The virtual machine instance lifecycle - creation, update, deletion - is managed by the scale set.
VM (virtual machines) - Virtual machines created outside of the scale set can be explicitly added to the scaleset.
Reference:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/management/overview
NEW QUESTION # 53
You have an Azure web app named WebApp1 that runs in an Azure App Service plan named ASP1. ASP1 is based on the D1 pricing tier.
You need to ensure that WebApp1 can be accessed only from computers on your on-premises network. The solution must minimize costs.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://azure.microsoft.com/en-us/pricing/details/app-service/windows/
https://docs.microsoft.com/en-us/azure/cdn/cdn-cors
NEW QUESTION # 54
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure container registry named Registry1 that contains an image named image1.
You receive an error message when you attempt to deploy a container instance by using image1.
You need to be able to deploy a container instance by using image1.
Solution: You select Use dedicated data endpoint for Registry1.
Does this meet the goal?
- A. Yes
- B. No
Answer: A
NEW QUESTION # 55
You have an Azure subscription that contains the following storage account:
You need 10 create a request to Microsoft Support to perform a live migration of storage1 to Zone Redundant Storage (ZRS) replication. How should you modify storage1 before the Live migration?
- A. Set the replication to Locally-redundant storage (IRS)
- B. Set the access tier to Hot
- C. Remove the lock
- D. Disable Advanced threat protection
Answer: A
NEW QUESTION # 56
You have an Azure subscription.
You plan to use Azure Resource Manager templates to deploy 50 Azure virtual machines that will be part of the same availability set.
You need to ensure that as many virtual machines as possible are available if the fabric fails or during servicing.
How should you configure the template? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Table Description automatically generated
Box 1: 2
Use two fault domains.
2 or 3 is max, depending on which region you are in.
Box 2: 20
Use 20 for platformUpdateDomainCount
Increasing the update domain (platformUpdateDomainCount) helps with capacity and availability planning when the platform reboots nodes. A higher number for the pool (20 is max) means that fewer of their nodes in any given availability set would be rebooted at once.
Reference:
https://www.itprotoday.com/microsoft-azure/check-if-azure-region-supports-2-or-3-fault-domains-managed-disk
https://github.com/Azure/acs-engine/issues/1030
NEW QUESTION # 57
You have an Azure subscription that contains a virtual network named VNET1 in the East US 2 region. You have the following resources in an Azure Resource Manager template.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
Explanation:
Explanation:
Box 1: Yes
Box 2: Yes
VM1 is in Zone1, while VM2 is on Zone2.
Box 3: No
Reference:
https://docs.microsoft.com/en-us/azure/architecture/resiliency/recovery-loss-azure-region
NEW QUESTION # 58
You have an Azure subscription named AZPT1 that contains the resources shown in the following table:
You create a new Azure subscription named AZPT2.
You need to identify which resources can be moved to AZPT2.
Which resources should you identify?
- A. VM1, storage1, VNET1, and VM1Managed only
- B. RVAULT1 only
- C. VM1 and VM1Managed only
- D. VM1, storage1, VNET1, VM1Managed, and RVAULT1
Answer: D
Explanation:
Explanation
You can move a VM and its associated resources to a different subscription by using the Azure portal.
You can now move an Azure Recovery Service (ASR) Vault to either a new resource group within the current subscription or to a new subscription.
Reference:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/management/move-resource-group-and-subscrip
https://docs.microsoft.com/en-us/azure/key-vault/general/keyvault-move-subscription
NEW QUESTION # 59
You need to meet the connection requirements for the New York office.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/hybrid-networking/vpn
NEW QUESTION # 60
Your network contains an Active Directory domain. The domain contains a user named User1. The domain is synced to Azure Active Directory (Azure AD) as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Box 1: a computer joined in the Active Directory domain
The Active Directory domain service stores passwords in the form of a hash value representation, of the actual user password.
Box 2: Stored in both Azure AD and in the Active Director domain
The Active Directory domain service stores passwords in the form of a hash value representation, of the actual user password.
To synchronize your password, Azure AD Connect sync extracts your password hash from the on-premises Active Directory instance.
References:
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/how-to-connect-password-hash-synchronization
NEW QUESTION # 61
You have an Azure subscription named Subscription1 that contains the following resource group:
Name: RG1
Region: West US
Tag: "tag1": "value1"
You assign an Azure policy named Policy1 to Subscription1 by using the following configurations:
Exclusions: None
Policy definition: Append tag and its default value
Assignment name: Policy1
Parameters:
- Tag name: Tag2
- Tag value: Value2
After Policy1 is assigned, you create a storage account that has the following configurations:
Name: storage1
Location: West US
Resource group: RG1
Tags: "tag3": "value3"
You need to identify which tags are assigned to each resource.
What should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-using-tags
NEW QUESTION # 62
You have an Azure Migrate project that has the following assessment properties:
* Target location: East US
* Storage redundancy: Locally redundant
* Comfort factor: 2.0
* Performance history: 1 month
* Percentile utilization: 95th
* Pricing tier: Standard
* Offer: Pay as you go
You discover the following two virtual machines:
* A virtual machine named VM1 that runs Windows Server 2016 and has 10 CPU cores at 20 percent utilization
* A virtual machine named VM2 that runs Windows Server 2012 and has four CPU cores at 50 percent utilization How many CPU cores will Azure Migrate recommend for each virtual machine? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
The equation is: 'core usage x comfort factor'. The comfort factor is 2.0.
So VM 1 is 10 cores at 20% utilization which equals 2 cores. Multiply that the comfort factor and you get 4 cores.
VM 2 is 4 cores at 50% utilization which equals 2 cores. Multiply that the comfort factor and you get 4 cores.
NEW QUESTION # 63
You have an Azure subscription named Subscription1 that is used be several departments at your company.
Subscription1 contains the resources in the following table:
Another administrator deploys a virtual machine named VM1 and an Azure Storage account named Storage2 by using a single Azure Resource Manager template.
You need to view the template used for the deployment.
From which blade can you view the template that was used for the deployment?
- A. RG1
- B. Storage1
- C. VM1
- D. Container1
Answer: A
Explanation:
Explanation
1. View template from deployment history
Go to the resource group for your new resource group. Notice that the portal shows the result of the last deployment. Select this link.
2. You see a history of deployments for the group. In your case, the portal probably lists only one deployment.
Select this deployment.
The portal displays a summary of the deployment. The summary includes the status of the deployment and its operations and the values that you provided for parameters. To see the template that you used for the deployment, select View template.
References:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-manager-export-template
NEW QUESTION # 64
Case Study 1 - Humongous Insurance
Overview
Humongous Insurance is an insurance company that has three offices in Miami, Tokyo and Bangkok. Each office has 5.000 users.
Existing Environment
Active Directory Environment
Humongous Insurance has a single-domain Active Directory forest named
humongousinsurance.com. The functional level of the forest is Windows Server 2012.
You recently provisioned an Azure Active Directory (Azure AD) tenant.
Network Infrastructure
Each office has a local data center that contains all the servers for that office. Each office has a dedicated connection to the Internet.
Each office has several link load balancers that provide access to the servers.
Active Directory Issue
Several users in humongousinsurance.com have UPNs that contain special characters.
You suspect that some of the characters are unsupported in Azure AD.
Licensing Issue
You attempt to assign a license in Azure to several users and receive the following error message: "Licenses not assigned. License agreement failed for one user." You verify that the Azure subscription has the available licenses.
Requirements
Planned Changes
Humongous Insurance plans to open a new office in Paris. The Paris office will contain 1,000 users who will be hired during the next 12 months. All the resources used by the Paris office users will be hosted in Azure.
Planned Azure AD Infrastructure
The on-premises Active Directory domain will be synchronized to Azure AD.
All client computers in the Paris office will be joined to an Azure AD domain.
Planned Azure Networking Infrastructure
You plan to create the following networking resources in a resource group named All_Resources:
- Default Azure system routes that will be the only routes used to
route traffic
- A virtual network named Paris-VNet that will contain two subnets
named Subnet1 and Subnet2
- A virtual network named ClientResources-VNet that will contain one
subnet named ClientSubnet
- A virtual network named AllOffices-VNet that will contain two subnets named Subnet3 and Subnet4 You plan to enable peering between Paris-VNet and AllOffices-VNet. You will enable the Use remote gateways setting for the Paris-VNet peerings.
You plan to create a private DNS zone named humongousinsurance.local and set the registration network to the ClientResources-VNet virtual network.
Planned Azure Computer Infrastructure
Each subnet will contain several virtual machines that will run either Windows Server 2012 R2, Windows Server 2016, or Red Hat Linux.
Department Requirements
Humongous Insurance identifies the following requirements for the company's departments:
- Web administrators will deploy Azure web apps for the marketing
department. Each web app will be added to a separate resource group.
The initial configuration of the web apps will be identical. The web
administrators have permission to deploy web apps to resource groups.
- During the testing phase, auditors in the finance department must be
able to review all Azure costs from the past week.
Authentication Requirements
Users in the Miami office must use Azure Active Directory Seamless Single Sign-on (Azure AD Seamless SSO) when accessing resources in Azure.
You need to resolve the Active Directory issue.
What should you do?
- A. From Active Directory Users and Computers, select the user accounts, and then modify the User Principal Name value.
- B. Run the IdFix tool then use the Update actions.
- C. From Azure AD Connect, modify the outbound synchronization rule.
- D. From Active Directory Domains and Trusts, modify the list of UPN suffixes.
Answer: B
Explanation:
IdFix is used to perform discovery and remediation of identity objects and their attributes in an on- premises Active Directory environment in preparation for migration to Azure Active Directory.
IdFix is intended for the Active Directory administrators responsible for directory synchronization with Azure Active Directory.
Scenario: Active Directory Issue
Several users in humongousinsurance.com have UPNs that contain special characters. You suspect that some of the characters are unsupported in Azure AD.
References: https://www.microsoft.com/en-us/download/details.aspx?id=36832
NEW QUESTION # 65
You plan to deploy the following Azure Resource Manager (ARM) template.
For each of the following statements, select Yes . Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 66
......
Microsoft AZ-104 Exam Practice Test Questions: https://www.prep4away.com/Microsoft-certification/braindumps.AZ-104.ete.file.html
Free AZ-104 Braindumps Download Updated: https://drive.google.com/open?id=1smlTAcuEVw498dyi5k8njfUU18YFxrpQ